-
HZZGF 120kV 5mA Portable DC Hipot Tester
120kV 5mA DC Hipot Tester is widely applied in the DC HV tests carried out for the zinc oxide lightening arrester, magnetic blow-out arrester, power cable, generator, transformer, circuit breaker, Add to Inquiry
The Hi pot test is a test of the dielectric strength of the insulation to ground. It is used to determine if the ground wall can handle an over-voltage situation. An over-voltage is a voltage higher...
The hipot test, derived from the term High Potential Test, is a direct application of a high voltage to a unit under test. The test voltage is usually much higher than the usual operating voltage in...
The dc hipot tester would not indicate the failure of a unit even with high Y capacitors because the Y capacitors see the voltage but don’t pass any current. Step for HIPOT Testing Only electrically...
Model 296. 5 kV @ 12 mA AC Hipot, 6 kV @ 5 mA DC Hipot Tester, CE Listed. Our Model 296 is a simple-to-use Hipot Tester with the built-in ability to easily test Ground Continuity (Low Current...
Feb 20, 2017 · b. Recommended testing procedures. Acceptable procedures for conducting Hi-Pot testing, although varying slightly in technique, have been standardized as either a “withstand test” or a...
$2,448.95 SKU: ATO-HTGTB-350 High voltage AC/DC hipot tester, capacity is 3 kVA, high voltage 50 kV, 50 Hz or 60 Hz, dry type transformer tester, with LCD display control box, withstand voltage...











