+86-312-6775656

Several factors affecting AC withstand voltage test

Jun 21, 2021

Factors affecting insulation AC withstand voltage breakdown

 

1. Temperature. Temperature has a great influence on the breakdown voltage of the insulation. As the temperature rises, the medium loss increases, and poor heat dissipation conditions cause thermal breakdown, that is, the increase in temperature can reduce the breakdown voltage.

 

2. Power frequency. The power frequency has a great relationship with the medium loss. Because the medium loss increases with the increase of the power frequency, the breakdown voltage is also directly related to the power frequency. For example, the breakdown voltage of 50Hz is 10% lower than the breakdown voltage of 25Hz.

 

3. Pressurization time. The voltage application time has a direct effect on the breakdown of the insulation. The higher the applied voltage, the shorter the time required for the breakdown to occur, and the longer the time required for the breakdown to occur if the applied voltage is lower.

 

4. The degree of dampness. After the insulation is damp, the insulation breakdown strength will decrease. For materials that are not easy to absorb moisture, the breakdown voltage after dampness drops to about half of that when they are not damp, and for materials that are easy to absorb moisture, the pressure resistance after dampness may be only one percent of that when they are dry.

 

Analysis of AC withstand voltage test results

 

The tested product generally undergoes an AC withstand voltage test, and within the duration, if it does not break down, it is considered qualified, and if it fails, it is considered unqualified.

 

In addition, because the AC withstand voltage test voltage is generally higher than the operating voltage, the equipment has a larger safety margin after passing the test. Therefore, using an AC withstand voltage test device to test is an important means to ensure the safe operation of power equipment.

 



The AC withstand voltage test device is a test equipment designed by our company according to the new industry test standards. It is safe, reliable, powerful, easy to use, and simple to maintain. It is mainly used to specify voltages for various electrical products, electrical components, insulating materials, etc. Insulation strength test under. And it is also an effective and direct device to identify the insulation strength of power equipment, and is an important content of preventive tests.

 

In the AC withstand voltage test, the key issue is to correctly select the value of the test voltage. On the one hand, it is required to ensure the insulation level, and on the other hand, it is necessary to consider the insulation deterioration caused by the excessively high test voltage. Generally, the following factors should be considered.

 

1. The value, duration and number of overvoltages that may be generated on the tested product. If the test product is unlikely to suffer a higher overvoltage, it is not necessary to use an excessively high test voltage; if the test product (such as a generator directly connected to the overhead line) may be subjected to a higher overvoltage, The value of the test voltage should be appropriately increased.

 

2. The insulation level used in the design of electrical equipment.

 

3. The condition of equipment insulation. During the operation of the equipment, due to the influence of various conditions, the insulation gradually deteriorates and the insulation performance decreases. Therefore, when determining the test voltage, the degree of insulation damage and the operating life should be considered. For example, the test voltage of the equipment in operation should be 75%~90% of the factory value.


Send Inquiry