+86-312-6775656
HZ-600H Sweep Frequency Response Analyser SFRA Test Kit

HZ-600H Sweep Frequency Response Analyser SFRA Test Kit

Huazheng HZ-600H Sweep Frequency Response Analyser SFRA Test Kit System Introduction The Sweep Frequency Response Analyzer is designed for power transformers rated 66 kV and above, as well as other special-purpose transformers. During operation and transportation, power transformers are susceptible to...
Product Details ofHZ-600H Sweep Frequency Response Analyser SFRA Test Kit

Huazheng Electric Manufacturing (Baoding) Co., Ltd. is one of the leading manufacturers and suppliers of HZ-600H Sweep Frequency Response Analyser SFRA Test Kit in China. Please feel free to buy high quality equipment for sale here from our factory. Good service and reasonable price are available.

 

HZ-600H Sweep Frequency Response Analyser SFRA Test Kit

 

System Introduction

The Sweep Frequency Response Analyzer is a specialized diagnostic instrument designed for power transformers rated 66 kV and above, as well as other special-purpose transformers.

During normal operation and transportation, power transformers are susceptible to short-circuit currents and physical impacts. These events generate powerful electrodynamic forces within the transformer windings. Under such forces, the windings can undergo permanent deformation-including distortion, swelling, or dislocation-which compromises the transformer's safe operation and reliability. The Sweep Frequency Response Analyzer detects these deformations early, enabling timely maintenance and preventing catastrophic failures.

 

Main Technical Indicators

Measuring Speed 1–2 minutes per single-phase winding
Output Voltage Vpp–25 V (automatically adjusted during test)
Output Impedance 50 Ω
Input Impedance 1 MΩ (response channel built with 50 Ω matching resistance)
Frequency Sweep Range 10 Hz – 30 MHz
Frequency Accuracy 0.001%
Frequency Sweep Mode Linear or logarithmic; sweep interval and number of points freely settable
Curve Display Amplitude-frequency curve
Measurement Dynamic Range –100 dB to +20 dB
Supply Voltage AC 100–240 V, 50/60 Hz (DC 12 V adapter recommended)

hz-600h sfra analyzer

Tester Maintenance

This section provides basic maintenance information. Do not attempt to disassemble, modify, or repair the Sweep Frequency Response Analyzer.

Basic Maintenance

Regularly wipe the surfaces of the tester and its accessories with a clean cloth.

Store the tester in a clean, low-humidity environment, protected from dirt and dust.

When not in use, place the tester in its packing case and keep the case level.

Senior Maintenance

Any advanced maintenance or repair must be carried out by qualified technicians from the company.

 

Ordering and Service

If the tester is damaged due to product quality issues within 18 months from the date of delivery, it will be repaired free of charge. For damages caused by other reasons, the company will only charge the repair cost.

We provide lifelong maintenance and technical services for our products.

Please contact us immediately upon discovering any abnormality in the tester. We will provide the most convenient solution for you. Do not disassemble the tester!

Sweep Frequency Response Analyser

image006

image008

Request for quote_

Hot Tags: HZ-600H Sweep Frequency Response Analyser SFRA Test Kit, China, suppliers, manufacturers, price, for sale, sfra test set, transformer test instrument, sfra transformer testing equipment, transformer short circuit impedance tester, transformer short circuit impedance test set, transformer winding deformation analyzer

Send Inquiry

(0/10)

clearall