HZ5375 5000A High Current Tester Primary Injection Test Set
HZ5375 5000A Primary Current Injection Test Set
Tech Data
| Model | HZ5375 5000A Primary Injection Test Set |
| Environmental Classification | Complies with Group III instrument requirements in GB6587.1-86 "General Specification for Environmental Conditions of Electronic Measuring Instruments" (suitable for outdoor use) |
| Input Voltage | AC 380V±10% |
| Power | 36kVA |
| Output Current | AC 0～5000A, stepless adjustable |
| Equipped with digital display ammeter on the panel | |
| Output Voltage | 6V (AC, matching output current range) |
Operating
(1) After the wiring is completed, you should check it again to see if there is a wiring error and whether the connector is in good contact.
(2) During the test, if there is a fire, and there is no abnormality such as no display when starting up, immediately turn off the power and recheck the wiring.
(3) During actual wiring, the current output terminal should form a loop, otherwise the instrument will not output current.
(4) The current riser is provided with a random output wire; the output external copper wire is selected according to 10A/mm2. (Standard configuration is two 3-meter test lines)
(5) The capacity of the equipment is designed for one hour operation.
Transportation And Maintenance
1.Transportation
This product must be packed during transportation. The packing box shall be wooden and shall be padded with foam and other anti vibration layers. The packaged products shall be able to be transported by road, railway and air. During transportation, it shall not be placed in the open trunk, and the warehouse shall be protected against rain, dust and mechanical damage.
2.Storage
The instrument shall be stored in a ventilated room with an ambient temperature of - 40 ℃~60 ℃, a relative humidity of no more than 82%, and no corrosive gas. It shall not be placed close to the ground and wall.
3.moisture-proof
In humid areas or humid seasons, if the instrument is not used for a long time, it is required to turn on the power once a month (about two hours), so as to distribute moisture and protect electronic components.
4.Anti-Insolation
When the instrument is used outdoors, avoid or reduce direct sunlight exposure to the display screen as much as possible, and do not put it in a particularly humid warehouse.
Guarantee
1. One year free warranty for normal use, life-long maintenance.
2. 24 hours response to take the standby replacement, on-site service or return to the factory processing, to ensure the user's normal use.
Hot Tags: hz5375 5000a high current tester primary injection test set, China, suppliers, manufacturers, price, for sale, 2000A Primary Current Injection Test Set, Single Phase Relay Tester, Single Phase Relay Test Kit, Three Phase Primary Current Injection Tester, Primary Current Injection Test Instrument, 3 Phase Primary Current Injection Test Set
Send Inquiry
