Direct Reading Iron Loss Tester Of Electrical Steel Sheet
Huazheng Electric Manufacturing (Baoding) Co., Ltd. is one of the leading manufacturers and suppliers of direct reading iron loss tester of electrical steel sheet in China. Please feel free to buy high quality equipment for sale here from our factory. Good service and reasonable price are available.
DAC-IR-2C Direct Reading Iron Loss Tester
Introduction
Summary
This instrument can measure the iron loss of electrical steel sheet. The Epstein Test is used extensively as the standard method for measuring iron loss. it requires, however, the preparation of special test samples and considerable time to make the required measurements.
The DAC-IR-2C is a Yoke Type Iron Loss Tester and has a great advantage compared to the Epstein method in that it provides a direct reading of iron loss scaled in watts per kilogram or watts per pound from a single sheet sample. It has been designed compact in size and simple to operate, thus is greatly helpful for quality management of steel sheets on various job sites.
Superceding the former portable type Iron Loss Tester DAC-IR-2 made in Japan SOKEN, DAC-IR-2C provides convenient and fast measurement of the core loss of Electrical Steel Sheet individual pieces and laminations of all sizes and shapes, simply by placing the probe. It measures the Iron Loss in W/kg indicating it on a large LED readout Display.
DAC-IR-2C can test the Min 5 mm of Width and the Max 0.99 mm of Thickness for any shapes of Electrical Steel Sheet.
Application
Acceptance testing by user and supplier of electrical steel for stamping,annealing and final assembly of laminated cores. The Tester can be used for identification of Electrical Steel Iron Loss.
Specification
| Parameter | Specification |
| Measurable watt loss | 0.10～19.99 W/kg (4-digit display) |
| Magnetic flux density | 1.5T, 1.7T (Tesla); applicable to non-oriented (S) and oriented grain (G) electrical steel sheets |
| Thickness selection | Via setting button (3-digit input) |
| Width selection | Via setting button (3-digit input) |
| Measurable dimension range | Thickness: 0.10～0.90mm; Width: ≥5mm; Length: ≥20mm |
| Test object | Non-oriented/oriented grain electrical steel sheets |
| Measuring accuracy | Error ＜±5% |
| Measuring frequency | 50Hz (synchronized with power supply frequency); 60Hz (optional) |
| Input power supply | AC100V/220V, selectable as per customer request |
| Overall dimension (W×H×D) | 220×140×350 mm |
| Net weight | About 4 kg |
|
Composition |
|
|
Measuring Unit DAC-IR-2C……………………………………………………………… |
1 set |
|
Standard Core (S & G) for Calibration ………………………………………………… |
2 pc |
|
Probe ………………………………………………………………………………… |
1 pc |
|
Probe Cord………………………………………………………………………………… |
1 pc |
|
AC Mains Cord(with earth lead and 3P inlet) ………………………………………… |
1 pc |
|
Aluminum Case………………………………………………………………………… |
1 pc |
Hot Tags: Direct Reading Iron Loss Tester Of Electrical Steel Sheet, China, suppliers, manufacturers, price, for sale
Send Inquiry
