HZDS-5B Live Cable Identification Tester

HZDS-5B

Live cable identification instrument, also known as cable identification instrument, multi-function cable identification instrument, and intelligent cable identification instrument, is designed for power cable engineers and cable workers to solve the technical problems of cable identification. The user can accurately identify one of the target cables from the multiple cables through the instrument, so as to avoid accidentally sawing the live cables and causing serious accidents. The cable identification starts from the operation at both ends of the cable, and the double numbers at both ends of the cable must be ensured to be accurate. This instrument is designed with PSK technology combined with precise algorithms. No matter how reliable the memory of on-site staff is, it cannot replace the recognition of professional instruments. This product also has the functions of live cable identification, power failure cable identification, AC current test, and AC voltage test. It is composed of a transmitter, a transmitting current clamp, a receiver, and a receiving flexible current clamp.

Technical specifications

1．Baseline conditions and working conditions

Influence	Base condition	Working conditions	Remarks
Ambient temperature	23℃±1℃	-10℃～40℃	/
environment humidity	40%～60%	＜80%	/
Measured voltage and current frequency	50Hz±1Hz	45Hz~70Hz	When testing voltage and current
Receiver working voltage	7.4V±0.5V	7.4V±1V	/
Transmitter operating voltage	11.1V±0.5V	11.1V±1.5V	/
External electric field, magnetic field	Should be avoided
Location of the cable under test	The cable under test is at the approximate geometric center of the flexible current clamp

2．Transmitter specifications

Features	Transmit a composite pulse frequency current signal, display the remaining battery voltage, and dynamically indicate the transmission status
power supply	11.1V large-capacity rechargeable lithium battery, fully charged and continuously working for about 8 hours
output method	Caliper coupling during power-on recognition; direct output during power-off recognition
Transmit frequency	625Hz, 1562Hz, 2500Hz, 10KHz (when electrified identification), press the up and down arrow keys to adjust the transmission frequency
Pulse voltage	500V (when power failure is recognized)
Pulse current	Maximum 5A (depending on the size of the loop resistance)
Pulse frequency	1 time/sec
Pulse Width	2ms
Launch clamp inner diameter	φ120mm
Test line length	3 meters, with alligator clip, 1 red and black each
Launch clamp size	Length, width, height 300mm×175mm×50mm
Launching clamp wire length	2m
Ground pin size	Length, width, height 225mm×100mm×10mm
Transmitter size	320mm×275mm×145mm
Display mode	Large LCD displays the remaining battery voltage in real time, with backlight
LCD size	Length and width 128mm×75mm;display area 124mm×67mm
Package size	Length, width and height 400mm×245mm×335mm
Operating temperature	-10℃～40℃
Storage conditions	-20℃~50℃,≤95％RH, No condensation
Backlight control	Yes, white backlight
Operating temperature	-10℃～40℃
Storage conditions	-20℃~50℃,≤95％RH, No condensation
Instrument quality	Transmitter 2.5kg; transmitting clamp 1.08kg; total weight 4.4kg (including receiver)
battery power	When the battery voltage is lower than 9.65V, the battery voltage low icon is displayed to remind you to charge the battery; when the battery voltage is lower than 9.5V, the device automatically shuts down
Charger	12.6V DC charger
Charging port	Round charging port, DC logo
Compressive	The transmitter adopts an integrated special toolbox design, and the box can withstand a pressure of about 200kg
Withstand voltage	AC 3700V/rms(Before the top and bottom of the instrument case)
Electromagnetic	IEC61326(EMC)
properties	IEC61010-1(CAT Ⅲ 300V,CAT IV 150V,Pollution degree 2)

3．Receiver specifications

Features	Live cable identification, power failure cable identification; AC voltage, current, frequency measurement
power supply	7.4V large-capacity rechargeable lithium battery, USB charging port, fully charged and continuous work for about 6 hours
Rated current	About 300mA max
Display mode	3.5 inch true color LCD screen display, color icon indication
Signal calibration	Yes, calibrate the transmitted signal. The current percentage between the received signal and the transmitted signal is between 75% and 135% of the calibration value, which is one of the conditions for successful identification
Signal calibration	After calibration, the test frequency and magnification cannot be changed, otherwise it will need to be re-calibrated; different cables need to be re-calibrated when testing different cables
Direction recognition	Yes, the transmitting clamp, receiving clamp and loading signal must be in the same direction, which is one of the conditions for successful identification
Cable identification is successful	Green tick icon indicates (√)
Non-target cable	Red-orange crossed icon indicates (×)
Receiver size	Length, width and height 207mm×101mm×45mm
Flexible current clamp	The length is about 630mm, the wire diameter is 6 mm or 12.5mm
Coil inner diameter	φ200mm (larger diameter can be customized according to needs)
Lead length	Flexible current clamp lead length: 2m
Voltage test line	1m long (1 each for red and black)
Scope of test	Power failure identification: the coil can detect pulse signals with a loop resistance of 0Ω～10kΩ; when the detection loop resistance is 10kΩ, the transmitter battery must be guaranteed to be above 11V (generally, the cable length can reach 0-10 kilometers, mainly due to the grounding resistance and cable resistance determined)
Scope of test	Live identification: The coil can detect pulse signals with a loop resistance of 0Ω～200Ω; when the detection loop resistance is 200Ω, the transmitter battery must be guaranteed to be above 11V (generally it can reach a cable length of 0-5 kilometers, mainly due to the grounding resistance and cable resistance determined)
Measuring range	AC voltage： 0.00V～600V(50Hz/60Hz)
	AC current： 0.00A～5000A(50Hz/60Hz)
	Current frequency： 45Hz~70Hz
Precision	AC voltage：±2%±3dgt
	AC current：±2%±3dgt
	Current frequency：±2%±3dgt
Identification signal	Color signal amplitude and digital display
Detection rate	About 1 time/sec
Gain adjustment	In the test interface, press the left and right arrow keys to adjust the signal magnification, the best signal amplitude bar is at 10~100
Backlight control	In the boot function selection interface, press the up and down arrow keys to adjust the brightness of the LCD backlight
Automatic shut-down	About 30 minutes after power on, the meter will automatically shut down to reduce battery consumption
battery voltage	When the battery voltage is lower than 6.5V, the battery voltage low icon is displayed, reminding to charge the battery
Charger	9V DC charger
Charging port	USB charging port
Working temperature and humidity	-10℃～40℃;below 80%Rh
Storage temperature and humidity	-10℃~50℃,≤95％RH, no condensation
Receiver quality	Current clamp 172g; receiver 370g (with battery)
Withstand voltage	AC2000V/rms(before the front and rear ends of the housing)
Suitable for safety regulations	IEC61010-1 CAT Ⅲ 600V,IEC61010-031,IEC61326,pollution degree 2