HZ2364 Three Phase Contact Resistance Tester is made and contained of advanced high-power switching power supply technology and advanced electronic circuit. It is the dedicated tester for the resistance of high and low switch, cable wire and welding joint. Its current uses national standard GB736 recommended standard DC, can measure the resistance value of being tested object under standard current status. The tester is small dimension, light weight, strong anti-interference, high precision, easy operation and perfect function protection and so on.
Technical Parameters
Selection | 100A | 200A | 300A | 400A | 500A | 600A | 10-5000A |
Measurement range |
100A customized |
100A 200A customized |
100A 200A 300A customized |
100A 200A 300A 400A customized |
100A 200A 300A 400A 500A customized |
100A 200A 300A 400A 500A 600A customized | Current customized 1, two-phase 2, three-phase |
Test range | 0~19999mW expandable | ||||||
Test precision | 0.5%rdg±10dgt | ||||||
Resolution | 0.01mW | ||||||
Working power | AC 220V±10% 50Hz±2% | ||||||
Length(mm) | 450 | 450 | |||||
Width(mm) | 250 | 250 | |||||
Height(mm) | 220 | 280 | |||||
Weight(Kg) | 9.9 | 12.9 | |||||
Environment temperature | －25°C ~50°C | ||||||
RH | £90%RH | ||||||
Attentions
1.Before power on, please contact current output end and being tested object.
2.Tester should be stored and placed in moisture-proof, dry and clean room.
3.Do not disassemble and revise the tester, or else caused electric shock risk.
4.Do not repair and self-revise, or else it is not the guarantee period.
5.Do read the user manual in details before using.