+86-312-6775656

HZ1211 Coulometric Karl Fischer Trace Water Analyzer

Jan 14, 2023

This instrument uses 220V AC, non-professionals should not open the machine shell without authorization.

The ground wire must be well grounded, and the ground resistance should be less than 10 ohms.

Please do not use the instrument in an explosive environment.

When using chemicals and solvents, please follow the manufacturer's instructions and general laboratory safety regulations.

All Karl Fischer reagents are flammable and toxic. If the skin comes into contact with Karl Fischer reagent, please rinse immediately with plenty of water. If your eyes come into contact with Karl Fischer reagent, please rinse immediately with plenty of water and consult a doctor.

Measuring principle

The Karl Fischer Coulomb method is used, also known as the electric quantity method.

Application field

As long as you need to analyze the moisture in raw materials, intermediates and products, you may use this instrument.

Mainly used in petroleum, chemical, electric power, refrigeration, pharmaceutical, environmental protection, geology, food and other fields.

_5.6 inch color touch screen, easy to operate and convenient.

_Drift correction: automatically deduct measurement errors caused by environmental moisture.

_Balance point setting: adapt to the inconsistency of different manufacturers or different batches of reagents.

_Method setting: A variety of methods can be set arbitrarily to satisfy the determination of different samples. Do one-click analysis.

_Fault Tips: Tips for faults that occur during use, and helps application operators to solve the faults that occur during use in a timely manner.

_A variety of sample types to choose from.

_A variety of sample units to choose from.

_A variety of concentration unit options, a variety of concentration algorithms, there is always one output format you need.

Technical Parameters

_Working power supply: AC220V 10% 50Hz

_Power of the whole machine: about 30W

_Environmental temperature: 5~40℃

_Dimensions: 300 x 260 x 210

_Host weight: about 2.5Kg

Technical index

_Electrolysis current: maximum 360mA

_Measurement range: 3 micrograms to 100 mg

_Lower detection limit: 1ppm

_Instrument resolution: 0.1 microgram

Send Inquiry