Winding deformation refers to the axial or radial dimensional changes that occur in the winding of a power transformer under the action of electric or mechanical forces when it is subjected to short-circuit current impact or during transportation. It usually manifests as local twisting, bulging, or displacement of the winding.
Test method for winding deformation
Conventional methods, such as measuring transformer ratio, DC resistance, etc., are difficult to diagnose transformer winding deformation due to low measurement sensitivity.
Capacitance method: By measuring the dielectric loss of the transformer winding and bushing through a bridge, the concentrated capacitance CL of the low-voltage winding to ground, the capacitance CHL between the high and low voltage windings, and the capacitance CH of the high-voltage winding to ground can be calculated.
Low voltage impedance method: By measuring the impedance or leakage reactance of the transformer winding at 50Hz, the change in impedance or leakage reactance is used to determine whether the transformer winding has undergone deformation that endangers operation, such as turn to turn short circuit, open circuit, coil displacement, etc.
Frequency response method: Input a sweep voltage signal at one end of the winding, and simultaneously detect the ground voltage signal at both ends of the winding at different sweep frequencies through a digital recording device to obtain the transfer function H (n) of the tested transformer winding. This method can determine the structural characteristics of the winding and diagnose the deformation of the winding by analyzing the frequency spectrum characteristics of the port parameters.
Advantages and disadvantages analysis
Conventional method: The operation is simple, but the sensitivity is low, making it difficult to accurately diagnose winding deformation.
Capacitive method: capable of measuring changes in capacitance, but sensitive to environmental interference.
Low voltage impedance method: used to determine deformation through impedance changes, suitable for various deformation situations.
Frequency response method: High sensitivity, able to accurately diagnose winding deformation, but requires professional testing equipment and complex operations.
What are the test methods for winding deformation?
Sep 04, 2024
Send Inquiry
