The insulation level of the insulated gloves should not be lower than 1000V.
1, Insulation grade standard for insulated gloves
The insulation level of insulated gloves refers to the highest voltage value that the gloves can withstand, which is determined by factors such as the thickness, material, structure, and usage environment of the gloves. According to the international standard IEC60903, the insulation level of insulated gloves is divided into the following categories:
Class 00: Maximum operating voltage of 500V.
Class 0: Maximum operating voltage of 1000V.
Class 1: Maximum operating voltage of 7500V.
Class 2: Maximum operating voltage of 17000V.
Class 3: Maximum operating voltage of 26500V.
Class 4: Maximum operating voltage of 36000V.
When choosing insulated gloves, the selection should be based on the required insulation level. In general, the insulation level of insulated gloves should not be less than 1.5 times the required insulation voltage.
2, How to check the insulation level of insulated gloves
To ensure the insulation performance of insulated gloves, it is necessary to regularly check their insulation level. The following is the method for checking the insulation level of insulated gloves:
1. Check the insulation level label of the gloves. Each insulation grade glove has a corresponding label, usually printed on the back of the glove's hand. Gloves that match the required insulation level should be selected.
2. Check the appearance of the gloves. The surface of the gloves should be inspected for defects such as cracks, scratches, or damages. If the above situation is found, gloves should be replaced immediately.
3. Conduct electrical tests. Put the gloves in water and apply conductive liquid on the surface of the gloves. Use a multimeter to measure the resistance values on the surface and inside of the glove. If the resistance value of the glove meets the corresponding insulation level standard, the glove is qualified.
