HZFD-200A Lead Acid Battery Discharge Capacity Test Machine
Huazheng Electric Manufacturing (Baoding) Co., Ltd. is one of the leading manufacturers and suppliers of hzfd-200a lead acid battery discharge capacity test machine in China. Please feel free to buy high quality equipment for sale here from our factory. Good service and reasonable price are available.
HZFD-200A Lead Acid Battery Discharge Capacity Tester
1.1 Features When Without Monitoring Function
The PTC ceramic resistor avoids the red hot phenomenon, making the whole discharge process safer;
The internal controller includes two CPUs for the highest safety, stability and accuracy in testing so that a CPU can sound an alarm and shuts down the tester upon failure of the other CPU;
Thanks to the all electric isolation technology, the discharge part can still operate normally in the case of strong electromagnetic interference or strong power interference;
The tester has a 2G memory and supports a U disk up to 32G;
The tester has functions such as check capacity test, discharge suspension, parallel load test and online compensated discharge for diversified occasions;
The tester can upload discharge data to a U disk via its USB interface and import them to a host PC so that the data management software on the host PC can analyze the discharge and generate corresponding data reports, making data uploading easier;
The tester is subject to intelligent single chip microcomputer ARM control and has a 7″touch screen LCD supporting menu operation and Chinese and English display;
The tester supports automatic protection: When the set discharge duration or the set discharge capacity has reached, or the voltage of battery pack is smaller than the set minimum or the load wiring is abnormal, the tester will automatically stop discharge, sound an alarm and record the shutdown mode;
The tester supports the setup of discharge stop conditions, including battery pack's final voltage, discharge capacity and discharge duration to make the discharge test safe;
The tester supports online compensated discharge and discharge tests for batteries in online service with help of external pincerlike current sensors, making discharge tests convenient. (This function is especially applicable to an occasion with only one emergency battery pack.)
1.2 Features When With a Monitoring Function
The PTC ceramic resistor avoids the red hot phenomenon, making the whole discharge process safer.
The internal controller includes two CPUs for the highest safety, stability and accuracy in testing so that a CPU can sound an alarm and shuts down the tester upon failure of the other CPU.
With the all electric isolation technology, the discharge part can still operate normally in the case of strong electromagnetic interference or strong power interference.
The tester has a 2G memory and supports a U disk up to 32G.
The tester has the following three wireless or wired communication modes: wireless or RS485 communication between a wireless acquisition box and the discharge main unit, which is for monitoring the voltage of each single battery in real time; wireless or RS485communication between the host PC's software and a wireless monitoring module, which is for wireless monitoring for the voltages of single batteries while the tester is not connected; RS485 communication between the host PC's software and the discharge tester with help of a communication line, which is for remote discharge control.
The wireless acquisition box can monitor each battery, so it can monitor the whole discharge process of a battery pack.
The tester has easy installation, debugging and maintenance and high stability and safety because its acquisition modules are isolated.
The software on the host PC can analyze such recorded data as total voltage, discharge current and single batteries' voltages, generate corresponding data reports, curves, graphs and reports indicating the battery pack performance directly and support queries and printing of these contents.
The tester can upload discharge data to a U disk via its USB interface and import them to a host PC so that the data management software on the host PC can analyze the discharge and generate corresponding data reports, making data uploading easier.
The tester is subject to intelligent single chip microcomputer ARM control and has a touch screen LCD supporting menu operation and Chinese and English display.
The tester supports automatic protection: When the set discharge duration or the set discharge capacity has reached, or the battery pack's voltage is smaller than the set minimum or the load wiring is abnormal, the tester will automatically stop discharge, sound an alarm and record the shutdown mode.
The tester support the setup of testing or discharge termination conditions, including single battery voltage, battery pack's voltage, discharge current and discharge duration.
The tester can record the discharge information of each single battery during testing or discharge, such as total capacity, total voltage and total current of the battery pack and voltage changes of the single battery with the minimum voltage.
The tester supports online compensated discharge and discharge tests for batteries in online service with help of external pincerlike current sensors, making discharge tests convenient. (This function is especially applicable to an occasion with only one emergency battery pack.)
HZFD-200A Battery Load Tester CE Certificate
|
Applicable battery |
Lead-acid battery |
|
|
Model |
HZFD-200A |
|
|
Output voltage |
110V |
220V |
|
Output current |
0-180A |
0-90A |
|
Operating mode |
Used independently or with a constant-current module |
|
|
Protection performance |
Input terminal overvoltage protection, prompts on the LCD; Reverse polarity protection, buzzer alarm; Overcurrent protection, prompts on the LCD; 85℃ overheat protection, prompts on the LCD, buzzer alarm. |
|
|
Single battery voltage acquisition |
The 433RF wireless module supports a communication distance longer than 100 m and monitoring for single battery voltages of 2V, 4V, 6V and 12V. If the total voltage is not beyond the set value, each battery pack will have an unlimited single battery quantity and can monitor one to sixteen RF wireless monitoring modules at the same time. One RF wireless monitoring module can monitor 12 single batteries at the same time. |
|
|
Control accuracy |
Discharge current: ≤±1%; battery pack's terminal voltage: ≤ ±0.1%; single battery voltage: ≤±0.05% |
|
|
Operating power supply |
||
|
Voltage |
Single-phase three-wire system: 220V AC (–20%~+30%); frequency: 45~65Hz; |
|
|
Withstand voltage test |
Input--casing: 2200Vdc 1min Input--output: 2200Vdc 1min Output--casing: 700Vdc 1min |
|
|
Safety |
Compliance line with EN610950 |
|
|
Wiring |
||
|
AC output |
Male socket in line with the applicable national standard, applicable to 1~1.5mm2 cable |
|
|
DC output |
25mm2 cable quick plug (red: positive; black: negative) |
|
Hot Tags: HZFD-200A Lead Acid Battery Discharge Capacity Test Machine, China, suppliers, manufacturers, price, for sale, 110vdc 100a battery discharger, battery discharge test equipment, battery load unit tester, battery discharge machine, Dc load bank, battery discharger, DC Load Bank Battery Discharge Tester, 48v 600a dc load bank
Send Inquiry
