Sf6 Hipot Test Transformer/High Accurancy 10kVA 100kv Withstand Voltage Tester

Based on the present and looking forward to the future, we will continue to strive to provide new and old customers with hv resonant test, battery discharge tester, Impulse Voltage Generator with superior quality and reasonable price with meticulous and thoughtful service. We pioneered in persistent exploration and thrived under the care of the community, which is why we have achieved what we have today. Our company pays attention to the humanized design of products and the harmonious coexistence of equipment and natural environment.

HZQ AC Hipot SF6 Gas Inflated Type Power Frequency Testing Transformer

Technical parameters of HZQ series alternating current test transformers

The operation of the insulation test with HIPOT tester is as follows:

1) Please make grounding connection for sample object, HV transformer and main control box first

2) Please discharge the sample object if the sample object is a capacitive equipment.

3) Please make connection for tester and sample object according to figure 3.

4) Please make power connection for main control box.

5) Confirm the high voltage value in withstand.

6) Setting the protection value of current by the pointer on the over current protection relay panel.

7) Adjust the regulator to zero position and then press down the close button on the panel the tester with enable the high voltage output unit.

8) If the regulator is not at zero position when you press down the close button the high voltage output unit would not be enabled. 

There is a zero position indicator light on the panel of the main control box.

9) Adjust the high voltage output to the withstand test value step by step. Read the high voltage value and LV current from meters at the same time.

10) Start the timer by the timer switcher on the main control box panel when the high voltage has.

11) If the current over the value set on the panel of the over current relay the tester would cut off the power supply of HV transformer immediately. It is said the test result is failure.

12) If the timer display value reach the set value the tester would have a sound alarm to inform operator that the withstand time is ok. If the tester has not start the over current protection unit before sound alarm it is said the test result is ok.

13) Open the power supply of HV transformer by press down the "open" button on the panel of the main control box when test is end.

14) Please discharge the high voltage circuit of sample equipment before remove off the cable connection of high voltage circuit.

Please do not start the test if some part of the tester had been destroyed.

At the same time, we do the job actively to do research and improvement for Sf6 Hipot Test Transformer/High Accurancy 10kVA 100kv Withstand Voltage Tester. In the new historical conditions, we need the spirit of hard struggle to inspire us to move forward, to promote and promote our career breakthroughs. Our company is enthusiastic about public welfare and devotes itself to repaying the society.

Hot Tags: HZQ SF6 Inflated Type Electrical Testing Transformer, China, suppliers, manufacturers, price, for sale, Inflated Type High Potential Testing Transformer, Inflatable High Voltage Testing Transformer, AC DC Testing Transformer, SF6 Gas Insulated Inflatable Testing Transformer, HZQ, Cable testing transformer 3 kva, 6 phase secondary injection relay test set, open cup flash point test machine, transformer dc resistance tester, sf6 gas leak detector, transformer test equipment list, oil particle count test equipment