LX-350A Universal Wire Cable Harness Tester
Product features
The system provides Chinese / English free switching interface
Self diagnosis and self correction
The system has the functions of automatic scanning and automatic point finding
The system provides advanced instantaneous short circuit and conduction test
It can be used for single side, standard, multi section and spot test of wire rod
Maximum AC1000V, DC1500V test voltage
The system adopts advanced four wire measurement, and the minimum judgment value of short circuit breaking is 200 Ω
Provide LCR meter module for precise measurement and analysis
the defective judgment is more accurate, and the test speed is doubled compared with the traditional similar products
Provide 320 * 240 full Chinese / English large screen graphic LCD display
Linear conduction, safety regulation and component test are all available
Fully programmable continuous test
Various interfaces are available for various applications
The system provides statistical and printing functions, and provides statistical analysis of good and bad products
Product model, number of measuring points, voltage measurement
350A 64P DC:5~1000VDC,AC:100~700VAC
Bullet test scope
Open / short circuit O / s 200 Ω ~ 50K Ω
Instantaneous on resistance test INT.COND 50mΩ~10Ω
On resistance test cond 50m Ω ~ 500 Ω
Resistance measurement r 0.1 Ω ~ 10m Ω
Capacitance measurement C 10PF ~ 1000 μ f
Diode measurement D 0.0v ~ 7.0v
Insulation impedance i.s 1m Ω ~ 1000m Ω
DC leakage current IL 0.1 μ a ~ 1000 μ a
High voltage leakage current IL 0.1mA ~ 10mA
Basic accuracy ± 1%
Test scan mode automatic / manual scan can be switched
Basic value of measuring speed 0.1sec
Measurement frequency and signal / voltage 100 ~ 100kHz, 1vac
Low voltage measurement signal 5VDC, 50mA AAX
Accuracy: ± 0.5%
High voltage (leakage current) test 100 ~ 700vac (350A model)
0.01 ~ 60sec delay time setting
High voltage insulation test 5V ~ 1000VDC (350A)
Pass / fail LED red / green indicator / picture display / sound alarm
Measuring contact 64 / 128 measuring contact
256 / 512 contact can be selected
High voltage correction positive and negative output
Automatic point finding terminal
Control panel system / quick / edit / function / key group
Interface printer port
Remote control port
RS-232 communication port
The memory device has 512KB SRAM built in and can be expanded to 1024KB
Built in backup battery
Power supply 115 / 230VAC voltage input ± 10%
60/50Hz
Auto point probe for accessories
Remote control line (optional)
Rs: 232 signal cable (optional)
Two in one 64pin ox horn adapter
power cord
User manual (warranty card)
Temperature and humidity 15 ℃ ~ 35 ℃
Relative humidity RH ≤ 75%
Size: (w * D * h) 455 * 190 * 350mm
Weight about 13kg (excluding accessories)
Wire specifications are required to be up to 1 μ F