Overview
The SF6 gas recovery, purification, charging and discharging device is used in the manufacturing plant of SF6 gas insulated electrical equipment. It uses departments such as operation and scientific research to vacuum various electrical equipment, fill the electrical equipment with SF6 gas, and recover SF6 gas from the used or tested electrical equipment. At the same time, it is purified, compressed and stored in storage tanks.
The recycling device is suitable for SF6 electrical appliances and GIS combination electrical appliances, etc.
This device is composed of a recovery system, an inflation system, a vacuum pumping system, a purification system, and a gas storage system in accordance with the DL/T662-1999 "Sulfur Hexafluoride Inflation and Recovery Device" standard. It has the following main functions:
1. Measurement of vacuum pumping and vacuum degree for the device itself and electrical equipment;
2. Recycling gases from electrical equipment;
3. Dry and purify the recovered and recharged SF6 gas;
4. Inflate SF6 appliances;
5. Compress, store, and bottle SF6 gas in electrical appliances.

The main components and advantages of the recycling device:
(1) Advanced design, complete functionality, reasonable structure, and simple and clear operation.
(2) Compression system: SF6 enclosed compressor is used, with no leakage.
(3) The vacuum pumping system adopts a bipolar vacuum pump and is equipped with an automatic oil return prevention device in the system. Vacuum pumping unit, filter unit, vacuum compressor unit, SF6 compressor unit, storage container unit, etc. can be used independently or connected as needed to meet different needs
(4) The purification system adopts a filtration system, which uses imported filter elements and dual stage filtration. The filter adopts electric heating and is equipped with high-efficiency adsorbents, resulting in a more significant purification effect (without the need for frequent replacement of adsorbents).
(5) Automatic confirmation of three-phase power supply and automatic protection of phase failure in the electrical system of the device.
(6) The device control system adopts the latest technology SF6 dedicated valve, and the air circuit design matches the pumping rate of the vacuum pump and compressor.
(7) The storage system is equipped with a 300KG liquid storage tank according to user requirements, and can directly fill gas cylinders. The dual container system reduces system working pressure and improves recovery efficiency.
(8) The equipment is mobile and the universal wheels are flexible and fixed.
Main technical performance indicators
(1) Type: mobile, refrigerated
(2) Working principle
a. Use compressor pressure - freeze liquefied SF6 gas.
b. The dryer assists in gas recovery and recharge.
c. When inflating, it is gasified through buffering and can be heated.
(3) Working environment temperature: -10 ℃ (-30 optional) -+40 ℃
(4) Main performance and technical parameters
1. Device limit vacuum degree ≤ 0.1Pa
2. The vacuum pumping rate of the device is ≥ 54m3/h (the maximum vacuum degree of the vacuum pump is less than 0.06Pa)
3. The initial inflation pressure of the device is less than 133 Pa
4. Device inflation final pressure ≤ 0.8M Pa
5. Device inflation rate>6m3/h
6. Device recovery initial pressure ≤ 0.8M Pa
7. The final recovery pressure of the device is less than -0.053MPa
8. Device recovery compressor rate ≥ 14m3/h
9. The annual leakage rate of the device is less than 1%
10. The maximum design pressure of the device storage tank is 4M Pa
11. Storage tank capacity 300KG
13. Storage method: liquid
14. Noise ≤ 75dB sound pressure level
15. Drying filter regeneration method: vacuum regeneration, heating and activation treatment
16. Power supply: AC three-phase 220V/380V ± 10%, 50HZ
17. Total power of the device < 13KW
19. Purification: Micro water 60PPm, oil 5PPm, impurities ≤ 1 micron, 100% filtered
The main components and functions of the device
The main functional components of the device include compressors, vacuum pumps, refrigeration systems, drying filtration regenerators, heaters, purifiers, filters, pipelines, valves, instruments, electrical controls, and structural components, as well as frame panels, wheels, and storage tanks.
The configuration parameters of the main components of the device are as follows:
1. SF6 compressor: high-pressure semi enclosed compressor
a: Theoretical displacement: 14m3/h
b: Maximum exhaust pressure: 2.5Mpa
c: Minimum suction pressure: 53Kpa
d: Maximum suction pressure: 0.35-0.8 Mpa
e: Power: 3KW
f: Power supply: 380V 50HZ
2. The vacuum pumping system adopts a direct connection vacuum pump 60
a: The vacuum pump is air-cooled and can operate for a long time
b: Vacuum pumping rate ≥ 54m3/h
c: Extreme vacuum degree ≤ 0.1Pa
d: Power 3KW
3. Refrigeration system: domestic compressor
4. Filtering system (purification system: using dual stage filtration with vacuum activation and self regeneration treatment)
5. SF6 valve: Ball valve DN15 SF6 special
6. Pressure gauge, vacuum gauge: Shanghai Yichuan pressure gauge, thermocouple digital display resistance vacuum gauge
7. Device warranty for one year, lifetime maintenance
Scope of supporting facilities for recycling equipment:
1. 1 device body
2. One 300KG storage tank (built-in)
3. 1 digital vacuum gauge (installed on the host)
4. 1 high-pressure hose at 10 meters/5 meters each
Recycling device file:
1. Device User Manual
2. Certificate of conformity
3. Product inspection report
4. Packing list
The device image is similar to the following image
