HZJK-100 Overhead Line Ground Fault Locator
I. Overview
The HZJK-100 Overhead Line Small Current Ground Fault Locator is designed for small current grounded overhead line systems. It enables precise localization of ground fault points after a single-phase ground fault occurs and the line is de-energized.
The HZJK-100 is a portable system capable of locating faults on multiple lines. The complete set includes a transmitter (HZJK-100T), a sensor (HZJK-100S), a receiver (HZJK-100R10), and accessories. After the faulty line is de-energized, the transmitter applies an ultra-low frequency (ULF) high-voltage signal to recreate the fault condition. The sensor, mounted on the line using an insulating rod, detects the signal and wirelessly transmits data to the ground-based receiver, which displays the measurement results. Current persists up to the fault point and disappears beyond it. The system allows for rough segmentation followed by precise pinpointing to quickly identify the fault location.
II. Functional Features
1. Suitable for small current grounding system distribution networks, detecting various faults such as single-phase metallic grounding, arc grounding, and transient resistance grounding of overhead lines.
2. It is particularly suitable for locating faulty lines with cable branches after the line is shut down.
3. Apply a high voltage signal to reproduce the fault, stabilize the current signal, and make it easy to detect.
4. Ultra low frequency signals avoid the influence of system distributed capacitance and can locate high resistance faults.
5. Safety features of the transmitter: high voltage start locking function, output allows direct short circuit.
6. The sensor uses a high-sensitivity sensor with an open design that does not require closure, making it easy to hang on the circuit.
7. Wireless communication transmission between sensors and receivers is safe and reliable.
8. The transmitter can be powered by mains electricity, generators, and dry batteries for sensors and receivers.
9. The transmitter has a small size and light weight; The sensor is designed to minimize volume and weight, making it convenient to hang along the line; The receiver is designed for handheld use.
10. The receiver adopts a large screen LCD display, which displays the sensor status, current waveform, and current value.
III. Technical indicators
1. Positioning accuracy: 0.2 meters.
2. Output characteristics of transmitter:
(1) Output frequency 1Hz
(2) Open circuit voltage: effective value of fundamental wave 0~2800V,
(Pulsating DC, peak voltage 8kV, equivalent to the peak phase voltage of a 10kV line);
(3) Short circuit current: effective value of fundamental wave 0~35mA (pulsating DC, peak value 100mA)
3. Wireless communication distance between sensor and receiver: not less than 30m.
4. Transmitter power supply: AC 220V mains power, can be connected to a generator (output power ≥ 1500W).
5. Transmitter power: maximum power of 900W.
6. Sensor power supply: 3 No. 7 alkaline dry batteries.
7. Receiver power supply: 5 No. 5 alkaline dry batteries.
8. Volume:
Transmitter 455 × 335 × 310mm; Sensor 180 × 100 × 35mm; Receiver 205 × 100 × 35mm
9. Quality: transmitter 15kg; sensor 0.45kg; receiver 0.45kg
10. Usage conditions: Temperature: -10 ℃ -40 ℃, humidity: 5-90% RH, altitude:<4500m.
