+86-312-6775656

HZCP-200A 200 L/min Coalescer-separator Oi Purifier System

Aug 28, 2025

HZCP-200A 200 L/min coalescer-separator oi purifier system

 

1. Introduction

1.1 Product Scope
This system is designed for efficient removal of free water and solid contaminants from petroleum-based oils, including hydraulic oil, lubricating oil, turbine oil, diesel, aviation kerosene, and more. It supports both bypass and online purification processes to maintain oil quality during operation.

1.2 Product Functions
The HZCP series equipment performs the following functions:

Demulsification: Breaks down oil-water emulsions.

Free Water Removal: Reduces free water content to below 100 ppm; under optimal conditions, achieves less than 50 ppm.

Solid Contaminant Filtration: Improves oil cleanliness to NAS Level 7 or higher.

Note: This system is not designed for removing dissolved water.

2. Working Principle
The coalescer-separator system incorporates two specialized filter elements: a coalescing filter and a separation filter. The oil purification process involves four stages: filtration, coalescence, sedimentation, and separation.

The oil first passes through the coalescing filter, which consists of hydrophilic fiberglass and composite materials. This filter removes solid particles and promotes the coalescence of fine water droplets into larger ones.

Larger water droplets settle by gravity into the collection chamber.

Smaller droplets are carried onward to the separation filter, made from hydrophobic stainless steel mesh. This element blocks water passage while allowing clean oil to flow through, achieving further purification.

3. Technical Parameters

Processing Capacity: 200 L/min

Water Content: Free water ≤ 100 ppm (varies by oil type)

Cleanliness Level: ≤ NAS 7

Power Rating: 3.0 kW

Dimensions: 1700 × 1100 × 1650 mm

Weight: 580 kg

Power Supply: Three-phase 380 VAC

Send Inquiry