+86-312-6775656

What is copper strip corrosion test?

Jun 16, 2023

Copper strip corrosion test refers to a test that tests the corrosion trend of oil towards copper under specified conditions. By conducting copper corrosion tests, it is possible to determine whether the oil contains impurities such as active sulfides that can corrode metals. By conducting copper corrosion tests, it is possible to predict the possibility of oil products corroding metals during storage, transportation, and use.

Copper corrosion can reflect the corrosiveness of diesel, and if the degree of copper corrosion is severe, it can affect the operation of the diesel engine's fuel supply system and fuel injection pump. According to the regulations of GB 252-2015 for ordinary diesel fuel, copper strip corrosion (50 ℃, 3h) shall not exceed level 1.

Copper corrosion can be measured according to GB/T 5096. The test method is to immerse a polished copper strip in a certain amount of sample and heat it to the specified temperature according to the product standard requirements, maintaining it for a certain period of time. At the end of the test cycle, remove the copper strip, wash it, and compare it with the corrosion standard color plate to determine the corrosion level.

Precautions for corrosion testing include:

1) The washing solvent used in the experiment must pass the copper strip test before it can be used.

2) The purity and size of the copper sheet used in the experiment must meet the requirements of the method.

3) The copper sheet must undergo surface treatment according to the method requirements.

4) To avoid corrosion, standard color plates may fade and should be stored away from light.

5) The sample should be placed and sampled correctly.

6) The test conditions such as environmental atmosphere and temperature should be correct.

Standard for corrosion detection of diesel copper sheets

GB/T 5096-1985 Petroleum Products - Copper Strip Corrosion Test Method

ASTM D130-12 Copper Strip Corrosion Test Method for Petroleum Products

ASTM-D130-ASTM-D1838-Oil-Copper-Strip-Corrosion-Test-Equipment

Send Inquiry