+86-312-6775656

Temperatures for open and closed flash points

Aug 01, 2022

Open flash point: mostly used in lubricating oil and heavy petroleum products. Because when measured by the open cup method, the vapor formed by the heating of the petroleum product continues to flow.


Closed flash point: used for light petroleum products with high evaporation, such as solvent oil, kerosene, etc., because the measurement conditions are similar to the actual storage and use conditions of light oil products, it can be used as the basis for fire safety control indicators.


In simple terms, the closed flash point is the flash point of a substance measured in a closed space, and the open flash point is the flash point of a substance measured in an open space. The open flash point is always higher than the closed flash point, because the oil produced by the open flash point tester. Vapors diffuse freely into the air and are relatively difficult to reach flash-fire temperatures. Usually the open flash point is 20-30°C higher than the closed flash point.


Send Inquiry