The impulse voltage generator is a power supply device that imitates the impulse voltage such as lightning and operating overvoltage. The impulse voltage generator can generate a wide range of voltage and energy to simulate lightning impulse, lightning chopping wave, operation impulse and other waveforms. It is used for power equipment and other test products to perform lightning impulse voltage full wave, lightning impulse voltage chopping and operation impulse voltage wave. Impulse voltage test to check insulation performance.

Scope of application: standard lightning impulse, lightning cut-off wave, operation impulse and non-standard impulse wave required by users on transformers, reactors, mutual inductors and other high-voltage electrical appliances, high-voltage thyristor valves, power cables, various high-voltage insulators, bushings, etc. Various types of impulse voltage tests. A set of equipment can generate a variety of test waveforms (standard and non-standard waveforms, waveforms proposed by the user). Applicable fields: Lightning protection and lightning test for quality inspection, appraisal, metrology, inspection and supervision agencies, power equipment manufacturers, railway communications, aerospace and aerospace vehicles, military scientific research units, colleges and universities, and meteorological departments.
Impulse voltage generator can emit various shapes of pulse waveforms, but according to the needs of experimental research, in accordance with relevant standards and national standards, the following types of impulse voltage waveforms are mainly generated:
1. Standard lightning impulse waveform.
2. Standard operation shock waveform.
3. Other special impulse voltage waveforms, such as special operation impulse waves.
Features:
1. The loop inductance is small, and band-stop filtering measures are adopted, which can produce standard shock waves under large capacitance loads, and the load capacity is large;
2. The voltage utilization coefficient is high, and the lightning wave and operating wave are not less than 85% and 80% respectively;
3. Convenient wave modulation, simple operation, good synchronization performance, reliable action;
4. The constant current charging automatic control technology is adopted, which has a high degree of automation and strong anti-interference ability.
