+86-312-6775656

DC high voltage generator measurement results can be affected by temperature

Jul 13, 2022

DC high voltage generators are widely used in power testing departments. It is an important equipment for the high-voltage test profession to conduct DC high-voltage tests on high-voltage electrical equipment such as zinc oxide arresters, power cables, transformers, and generators.

However, some factors will affect the accuracy of the test values. There are many factors that affect the measurement results of the DC high voltage generator, such as the influence of the boosting speed, the influence of the residual charge, and the influence of the connection position of the microammeter. Here we talk about some price comparisons. Common basic factors that affect the results of DC high voltage generators, temperature effects and surface leakage current effects. The influence of temperature measured by the DC high voltage generator: The temperature has a very obvious influence on the measurement results of the DC high voltage generator. If the temperature of the equipment is too high, the leakage current will be too large. The leakage current changes significantly within the temperature range. It should be reminded that, especially in low temperature weather, if the test result is too out of tolerance, we need to consider the influence of the ambient temperature, and we cannot just judge the failure or damage of the test product. The influence of the surface leakage current measured by the DC high voltage generator In fact, if the leakage current is subdivided, it can be divided into volume leakage current and surface leakage current. Wipe the surface of the test sample as clean as possible, and dry it or connect a shielding ring if necessary, which can effectively avoid excessive leakage current. We know the large number of factors that affect the measurement results of the DC high voltage generator, so the test personnel should try to avoid it as much as possible during the operation.

120kv DC Hipot Tester (4)

Send Inquiry