+86-312-6775656

Common Causes of Cable Failures

Sep 03, 2022

1. Damage due to external force: Many common faults in cables are caused by mechanical damage. For example, standard construction when laying and assembling cables is easy to cause mechanical damage; civil works on directly buried cables are also easy to damage the cables during operation.


2. Moisture return of the insulation layer: This kind of thing is also very common, and usually occurs at the cable interface in direct burial or in the pipe groove. For example, if the cable connector is not well-made and the connector is made in humid climate conditions, the connector will seep water or water vapor. It will take a long time but will produce water tree technology under the action of the electrostatic field, which will slowly endanger the insulation strength of the cable. cause common failures.


3. Electrochemical corrosion: The cable is immediately buried in the area with strong acid and strong alkali effect, which often causes the armored cable, tin sinker or outer sheath of the cable to be eroded, and the protective layer is subject to electrochemical corrosion or electrolytic corrosion for a long time. , resulting in an ineffective protective layer, a reduction in the insulation layer, and a common failure of the cable.


4. Long-term overload operation: overload operation, because of the thermal effect of the current, the load current will inevitably cause the electrical conductor to become hot when the cable is loaded, and the skin effect of the free charge and the eddy current loss of the steel armor and the loss of the insulating medium will also cause Extra heat is generated, which increases the temperature of the cable. In the long-term overload operation, the high ambient temperature will accelerate the aging of the insulating layer, so that the insulating layer is damaged. Especially in hot summer, the temperature of the cable often causes the defect of the cable insulation to be penetrated first.


5. Common faults of cable connectors: The cable connector is a weak stage in the cable route, and the common faults of the cable connector caused by the immediate fault of the staff (poor engineering construction) often occur. When the construction team is making the cable connector, if the connector is too loosely connected to the original net, and the heating is not in place, it will lead to the reduction of the insulation layer of the cable head, which will lead to safety accidents.


6. Environment and ambient temperature: The external environment and pyrogen where the cable is located will also cause the cable temperature to be too low, insulation breakdown, and even explosion and fire.


7. The normal aging of the cable itself or its own reasons such as flood disasters.


Send Inquiry