+86-312-6775656
HZHG-100KV-1.5 100kV AC DC Voltage Divider

HZHG-100KV-1.5 100kV AC DC Voltage Divider

Huazheng HZHG-100KV-1.5 100kV AC DC Voltage Divider Technical Specifications Structural Layout Description ① High voltage input: The top of the voltage equalizing cap (M8 ) is the high voltage connection terminal to be measured. ② High-voltage cylinder: built-in voltage-dividing resistor and capacitor. ③Output: The sampling signal output terminal...
Send Inquiry
Product Details ofHZHG-100KV-1.5 100kV AC DC Voltage Divider

Huazheng Electric Manufacturing (Baoding) Co., Ltd. is one of the leading manufacturers and suppliers of hzhg-100kv-1.5 100kv ac dc voltage divider in China. Please feel free to buy high quality equipment for sale here from our factory. Good service and reasonable price are available.

 

Huazheng HZHG-100KV-1.5 Voltage Divider

 

Technical Specifications

Category Parameter Specification
High-Voltage Probe Rated Voltage AC 100 kV / DC 100 kV
  Insulation Medium Dry dielectric material
  Capacitance 100 pF
  Resistance 800 MΩ
  Withstand Voltage 1.1 x rated voltage, 1 minute
Kilovoltmeter Parameters Voltage Input 0 – 200.00 V
  Voltage Display 0 – 1000 kV
  DC Accuracy ±1.0% ± 100 digits
  AC Accuracy (True RMS) ±1.5% ± 200 digits
  Frequency Response 45 – 65 Hz
  Division Ratio 1:1 to 1:9999

 

Structural Layout Description

product-785-953

① High voltage input: The top of the Corona Shielding Ball / Toroid Cap (M8 terminal) is the high voltage connection terminal to be measured.

② High-Voltage Divider Column / Insulating Cylinder: built-in voltage-dividing resistor and capacitor.

③ Output: The sampling signal output terminal of the voltage divider is connected to the input terminal of the meter panel.

④ Grounding: connected to the earth grid.

⑤ Display area: Automatic identification of AC and DC. When the input is AC, it is displayed as AC; when the input is DC, this value is displayed as DC. When used with a voltage divider, it is necessary to set a suitable voltage divider ratio (set at the factory).

⑥ Sampling signal input: sampling voltage input connection port.

⑦ Charging port: charging terminal (connect to mains 90-220V).

⑧ Power switch: main power switch.

 

Preparation before the test

Position the AC/DC voltage divider on a dry, stable surface, ensuring an electrical safety clearance around the unit of at least twice its total height (2H clearance rule) to minimize stray capacitance interference and prevent flashover.

Ground connection: The grounding poles at the bottom of the voltage divider and on the kilovolt meter panel should be reliably grounded. It is prohibited to use the voltage divider before grounding.

Signal connection: The coaxial cable provided to the user is a sampling signal connection cable dedicated to the kilovoltmeter. Use this cable to connect the signal output port at the bottom of the voltage divider to the signal input port on the kilovoltmeter panel.

Note: The supplied double-shielded coaxial cable is a factory-calibrated dedicated signal cable. Do not substitute, splice, or extend it with ordinary cables or arbitrary wires.

High voltage connection: Use a high voltage lead to connect the high voltage measured end to the M8 screw of the voltage equalizing cap at the top of the voltage divider.

 

huazheng company info

Customer Visit

Case

Request for quote_

Hot Tags: hzhg-100kv-1.5 100kv ac dc voltage divider, China, suppliers, manufacturers, price, for sale, insulated rescue hook, acdc kilovoltmeters, Contact Voltage Regulator, voltage divider 50kv 100kv 150kv 300kv, High Voltage Test Set, hi pot tester ac dc

Send Inquiry

(0/10)

clearall