HZ-662 ASTM D86 Petroleum Products Distillation Apparatus
Huazheng Electric Manufacturing (Baoding) Co., Ltd. is one of the leading manufacturers and suppliers of hz-662 astm d86 petroleum products distillation apparatus in China. Please feel free to buy high quality equipment for sale here from our factory. Good service and reasonable price are available.
ASTM D86 Petroleum Products Distillation Apparatus
Overview
The HZ-662 ASTM D86 Petroleum Products Distillation Apparatus are designed and manufactured according to GB / T6536-97 standard. This instrument is a low-temperature, single-tube working mode distillation tester for petroleum products, which is an ideal instrument for low-temperature distillation test of petroleum products.
The HZ-662 ASTM D86 Petroleum Products Distillation Apparatus are suitable for distillation determination of gasoline, aviation gasoline, jet fuel, solvents with special boiling points, naphtha, diesel, distillate fuels and similar petroleum products according to GB/T 6536.
Features
Compared with similar products in the market, our ASTM D86 Petroleum Products Distillation Apparatus are competitive in price and excellent in quality. It adopts digital temperature control instrument, stainless steel heater and new type of refrigerator to form a constant temperature bath, with uniform temperature in the bath, fully meeting the requirements of the test. This instrument is complete and easy to use.
Technical Parameters
Power supply | AC220V ± 10% 60Hz |
Heating power | 2KW |
Refrigeration power | 0.5KW |
Steam temperature measurement range | 0℃ ~ 400 ℃ |
Electric furnace temperature measurement range | 0℃ ~ 500 ℃ |
Refrigeration temperature range | 0℃ ~ 100 ℃ |
Refrigeration control accuracy | ± 1 ℃ |
Temperature measurement accuracy | ± 0.1 ℃ |
Volume accuracy | ± 0.1ml |
Fire alarm system | Nitrogen fire |
HZ-662 ASTM D86 Distillation Apparatus/ Distillation Test Equipment
Operating Procedures
1. After unpacking the instrument, please check the accessories according to the packing list. If it is damaged, please contact our company in time.
2. The instrument should be carried vertically. The inclination angle should not be greater than 30 degrees along with the height of the instrument. It should be installed in a place with good ventilation and light, and the distance from the wall should be more than 0.2 meters. The installation should be stable, otherwise, the vibration and noise will increase.
3. Check the antifreeze. The antifreeze has been added at the factory.
4. Connect the power supply of the instrument to a socket with a capacity of 220V/ 15A or more. Be sure to have a good ground wire.
5. Take a 100ml sample from a graduated cylinder, and pour as much as possible of the sample from the graduated cylinder into the distillation flask, taking care that no liquid can flow into the branch tube of the distillation flask.
6. Insert the temperature sensor for measuring steam vertically into the distillation flask. The lowest end of the sensor should be 10mm lower than the highest point on the bottom of the inner wall of the branch tube of the distillation flask.
7. Extend the branch tube of the distillation flask into the condensing tube 25 mm to 50 mm so that the rubber stopper on the branch tube is tightly connected to the condensing tube. Rotate the knob of the lifting rack to adjust the height of the electric furnace, and adjust the quartz glass partition to align the electric furnace with the center of the bottom of the distillation flask.
8. Hang the drainage piece on the wall of the measuring cylinder, then place the measuring cylinder in the recovery chamber, rotate the measuring cylinder so that the drainage piece is not on the optical path of the initial distillation point detection, and close the door of the recovery chamber.
9. Check that all parts are ready, turn on the main power of the instrument, and follow the steps on the touch screen to set the distillation parameters (for the detailed operation process of the touch screen, see the next section).
10. After the test, turn off the power switch.
Hot Tags: HZ-662 ASTM D86 Petroleum Products Distillation Apparatus, China, suppliers, manufacturers, price, for sale, manual distillation apparatus astm d86, automatic distillation apparatus-astm d86, astm d86 distilling apparatus, d86 distillation unit, ASTMD86 HZ-662, astm d86 distillation tester, carbon residue test equipment, equilibrium reflux boiling point measuring instrument, Water Separability Test Equipment, oil interfacial tension tester, Water Separability Tester, freezing point tester
Send Inquiry
