The continuous improvement of our production process technology can effectively enhance the quality of our zinc oxide arrester tester, density measuring devices, open cup flash point test equipment and thus strengthen the brand image. Over the years, our company has established a win-win and mutually beneficial cooperative relationship with our customers, so that our company can develop healthily and rapidly. In order to gain customer loyalty, our company continues to provide customers with excellent value, because only value can drive customer loyalty, enhance customers' repeat purchase behavior and increase corporate profits.

HZSF-702 SF6 Gas Dew Point Moisture Meter

SF6 Gas Dew Point Meter

Feature

Portable design	light, portable, convenient to use.
Smart calibration	The sensor probe automatically calibrates to zero point to ensure the accuracy for each measurement;
Rapid measurement	When start work,it takes a short time on measurement,and get the humidity value.
Low gas consume	It just consume 2L(101.2kPa)in a test.
Self-locking joint	The self-locking joint is imported from Germany, safe, reliable, leak-proof.
Data memory	High-capacity design, save up to 200set test data.
Legible display	Dew point, Micro moisture (ppm), ambient temperature, ambient humidity, time, date, battery, etc, can be read from the LCD.
RS232 port	Can be connected with serial printer, carry on data printing.
Accurate measurement	Increases the temperature compensation function to ensure the accuracy of measurement results under various temperature conditions.
Open calibration	This unit comes with a calibration function that allows you to calibrate the data without connecting to a computer.

SF6 Gas Dew Point Meter

Specification

Dew point	Ranges	－80℃～+ 20℃
	Accuracy	±1℃(－60℃～+ 20℃)or ±2℃(－80℃～－60℃)
	Response time	63% takes 5s, 90% takes 45s / 63% takes 10s, 90% takes 240s
Ambient temperature	－40℃～＋80℃
ambient humidity	0～100％ RH
LCD display	4.3 inch touch screen
Power	AC 220V
	Built-in rechargeable battery
Battery	Charge 20 hours, operating 10 hours

Operation

1. Connect To SF6 Electrical Equipment

Connect the screw thread port to the switch joint, screw up it, then close the needle valve on the other head of the tube.

Connect the quick coupling of the test tube to the inlet of the meter.

Connect the vent tube to the outlet.

At last, screw up the switch joint to the SF6 electrical equipment.

2. Initialization

Power on the meter, it will take 5 seconds to initialize.

3. Check The Battery

The meter takes precedence for use alternating current.

when use DC power, view the battery on top right corner. when the battery indicates the electricity less than 20%, please recharge the equipment and then begin to use.

4. Start

Open all needle valves of stream tube, use flow valve adjust flow to about 0.5L/M, then begin to measure the dew point of SF6.

It takes 5-10 minutes for the first measurement, followed test will only need take 3-5 minutes for each device.

5. Save Data

After test,save the data and print it.

6. Test Other Equipment

When complete one set of equipment, close the needle valve of the stream tube and turn off flow valve. Take the adapter off from SF6 electrical equipment. If any equipment needs to be tested repeat steps above.

7. Test Complete

After all tests, Please turn off the equipment.

lQDPKcrtGtmqmW_NAazNAyCw_iF2foFjEn0JNdw6T7ADAg_800_428

We adhere to the focus strategy, continuously invest in research and development of Sf6 Dew Point /Purity Tester, and drive innovation by customer demand and technology, so that the company is always in the forefront of the industry and promotes the development of the industry. Our company will always adhere to the market-oriented, customer-oriented, through full participation, system management, continuous improvement and other ways, to provide customers with high-quality products and services. We are courageous and willing to devote ourselves to create new miracles by being motivated and constantly going beyond.

Hot Tags: HZSF-702 SF6 Gas Dew Point Moisture Meter, China, suppliers, manufacturers, price, for sale, sf6 gas moisture content measurement, sf6 dew point tester, sf6 gas dew point meter, SF6 Gas Dew Point Test Equipment, HZSF-702 dew point test of sf6 gas, Handheld SF6 Dew Point Analyzer, chilled mirror dew point meter, Chilled Mirror Dew Point Meter Instrument, threephase relay protection tester, circuit breaker timing test machine, insulating oil dielectric loss tester, 50kv insulation resistance tester, contact resistance meter price, Automatic dielectric loss tester

[[ProKeywords]]