Resistance Test Equipment for Winding Resistance and Transformer (AT516)

As our underground cable fault pinpoint locator, winding resistance tester 3 phase, oil flash point testing machine adopts leading-edge technologies and successful marketing approaches, we are now ahead of the competition in the industry. We have now a specialist, efficiency staff to provide good quality company for our consumer. All our employees are willing to work with all customers to create a sincere, friendly, integrated and cooperative business space, and hope to receive the support and love of our customers, promoting our mutual development and progress. We believe that we have responsibility before we have power, taking responsibility is both a qualification and an honor. We establish a sound quality management system, comprehensively strengthen the foundation of quality management and improve quality management capability.

HZ-3320D DC Winding Resistance Tester 20A 3 channels

Summary

DC resistance of transformer is one testing item which must be tested during ex-work test of semi-finished products and final products, installation, acceptance test and preventive test of electric power department, which can effectively find out material selection of transformer coil, welding, looseness of connection part, missing strand, broken wire etc manufacturing defect and existing hidden problems after operation. In order to meet rapid measurement demand of transformer DC resistance, HZ-3320D DC Winding Resistance Tester 20a 3 channels applies new power technology, which is characterized with small volume, light weight, big output current etc. The whole machine is controlled by a single chip microcomputer, which has automatic self-inspection, data process, display etc functions, it also has automatic discharge and discharge audio alarm and indication etc functions. Testing accuracy of instrument is high, operation is easy and simple, and it can realize rapid measurement of transformer DC resistance.

Tech Data

Common Problems And Solution Methods

1. Don't start and buzzer continues sound

Firstly check whether power supply is connected with AC380V or voltage of input power supply is too low under such condition.

2. Crystal screen can't be lit when machine is started.

Firstly check whether power supply is normal in case of this situation, then check whether fuse is broken. If it is broken, replace new fuse.

3. Liquid crystal screen for starting machine is lit but display is abnormal or not display

Firstly start again and press re-set key once under such condition.

4. Testing data isn't stable or error is too great

Firstly check testing wire whether it is virtually connected and loose under such condition. If it isn't still solved, check whether the sample is corroded.

5. Always display "Charging …." during testing process

Firstly exclude magnetic circuit problem of the transformer in case of this situation. If the current isn't changed for long time and it is always around zero, check whether there is short circuit phenomenon in the circuit. If current isn't always charged, check whether measurement scope is exceeded.

6. "Exceed measurement scope". If resistance value is greater than 50Ω during testing process, it will inform "Exceed measurement scope", the instrument will not stop testing, and it will continue display testing result. But the measurement result may be inaccurate, it belongs normal phenomenon.

7. "Overheat protection" Temperature may rise up because the power supply in the instrument works for long time or is damaged, it will inform "Overheat protection". Start the machine and don't carry out testing, let the air fan work for 10 minutes and let internal temperature drop down as soon as possible, and then carry out testing. If it can't be tested, power supply may be damaged.

By adhering to high-quality products and services, we ensure that we never lower the quality of our Resistance Test Equipment for Winding Resistance and Transformer (AT516) for reasons of competitiveness. We always take green development and environmental protection development as the bottom line of our company. We will continue to expand and optimize our major industries, while actively developing new growth points.

Hot Tags: HZ-3320D 3 Channel DC Winding Resistance Tester, China, suppliers, manufacturers, price, for sale, 3-Phase Transformer Winding Resistance Meter, Three Channel Winding Resistance Tester, Three Channel Winding Resistance Test Set, Three Phase DC Resistance Measurement, HZ-3320D, hz3320d, 3 circuit dc resistance tester, Three phase transformer DC resistance tester, 20a winding 3 phase resistance tester, ct pt comprehensive tester, dielectric strength test device, oil trace moisture tester, sf6 gas leakage detection equipment, Karl Fischer Titrator, sf6 gas density relay tester