Since the establishment, our company has always adopted the corporate culture spirit of "diligence, sincerity and trust" to win the support and trust of the majority of customers in the society and establish a good image in the industry of phasing stick 11kv, transformer capacity test equipment, ct pt test kit. By creating a complete after-sales service system and accepting customer feedback on products, we are constantly updating and improving product quality and services. Our company has an elite team with international vision and local experience to provide professional international marketing services for customers. We are working step by step to achieve the goals of our corporate strategic planning. In the same industry, our technology, production capacity and sales are in a leading position.

HZSF-702 SF6 Gas Dew Point Moisture Meter

SF6 Gas Dew Point Meter

Feature

Portable design	light, portable, convenient to use.
Smart calibration	The sensor probe automatically calibrates to zero point to ensure the accuracy for each measurement;
Rapid measurement	When start work,it takes a short time on measurement,and get the humidity value.
Low gas consume	It just consume 2L(101.2kPa)in a test.
Self-locking joint	The self-locking joint is imported from Germany, safe, reliable, leak-proof.
Data memory	High-capacity design, save up to 200set test data.
Legible display	Dew point, Micro moisture (ppm), ambient temperature, ambient humidity, time, date, battery, etc, can be read from the LCD.
RS232 port	Can be connected with serial printer, carry on data printing.
Accurate measurement	Increases the temperature compensation function to ensure the accuracy of measurement results under various temperature conditions.
Open calibration	This unit comes with a calibration function that allows you to calibrate the data without connecting to a computer.

SF6 Gas Dew Point Meter

Specification

Dew point	Ranges	－80℃～+ 20℃
	Accuracy	±1℃(－60℃～+ 20℃)or ±2℃(－80℃～－60℃)
	Response time	63% takes 5s, 90% takes 45s / 63% takes 10s, 90% takes 240s
Ambient temperature	－40℃～＋80℃
ambient humidity	0～100％ RH
LCD display	4.3 inch touch screen
Power	AC 220V
	Built-in rechargeable battery
Battery	Charge 20 hours, operating 10 hours

Operation

1. Connect To SF6 Electrical Equipment

Connect the screw thread port to the switch joint, screw up it, then close the needle valve on the other head of the tube.

Connect the quick coupling of the test tube to the inlet of the meter.

Connect the vent tube to the outlet.

At last, screw up the switch joint to the SF6 electrical equipment.

2. Initialization

Power on the meter, it will take 5 seconds to initialize.

3. Check The Battery

The meter takes precedence for use alternating current.

when use DC power, view the battery on top right corner. when the battery indicates the electricity less than 20%, please recharge the equipment and then begin to use.

4. Start

Open all needle valves of stream tube, use flow valve adjust flow to about 0.5L/M, then begin to measure the dew point of SF6.

It takes 5-10 minutes for the first measurement, followed test will only need take 3-5 minutes for each device.

5. Save Data

After test,save the data and print it.

6. Test Other Equipment

When complete one set of equipment, close the needle valve of the stream tube and turn off flow valve. Take the adapter off from SF6 electrical equipment. If any equipment needs to be tested repeat steps above.

7. Test Complete

After all tests, Please turn off the equipment.

lQDPKcrtGtmqmW_NAazNAyCw_iF2foFjEn0JNdw6T7ADAg_800_428

Through a series of initiatives, we realized the improvement of the company's management system and promoted the quality of Portable Sf6 Gas Dew Point/ Purity /Decomposition All-Purpose Comprehensive Analyzer. The company promotes the development of the company with continuous innovation, continuously pursues and introduces new technology and management, adjusts and improves the product structure of the company, strengthens internal basic management, and ensures product quality and strives to open up new markets. Our company adheres to the tenet of 'survive by quality, develop by reputation', and always implement the 'integrity' policy to meet customer needs.

Hot Tags: HZSF-702 SF6 Gas Dew Point Moisture Meter, China, suppliers, manufacturers, price, for sale, sf6 gas moisture content measurement, sf6 dew point tester, sf6 gas dew point meter, SF6 Gas Dew Point Test Equipment, HZSF-702 dew point test of sf6 gas, Handheld SF6 Dew Point Analyzer, chilled mirror dew point meter, Chilled Mirror Dew Point Meter Instrument, ac withstand voltage testing set, vlf hv cable testing equipment, sf6 gas leak tester, Transformer Oil Breakdown Voltage Test Set, impulse voltage test system, DC System Ground Fault Locator

[[ProKeywords]]