
Multi-Functional Switchgear Sf6 Gas Analyser/Moisture Analyser/Dew Point Tester/Purity Tester
Smart calibration: The sensor probe automatically calibrates to zero point to ensure the accuracy for each measurement
Product Introduction
We follow the direction of international popular development, follow the relevant international and national industry standards, high starting point, to provide users with relay test unit, Ac Resonant Test Set, vlf cable tester that is in line with the development trend. Our company will give full play to our technical and talent advantages and make due contributions to economic development. We respect the diversity of our employees, maintain their dignity, and give them a sense of security, fulfillment, and commitment to their work. We focus on teamwork within the company, so that the employees are closely united, and strive to become a platform that can fully reflect the personal style of employees and give full play to their personal values, so as to provide high-quality services to customers. Our company provides customers with solutions and products with our first-class technology and pragmatic service.
HZSF-702 SF6 Gas Dew Point Moisture Meter

Feature
Portable design | light, portable, convenient to use. |
Smart calibration | The sensor probe automatically calibrates to zero point to ensure the accuracy for each measurement; |
Rapid measurement | When start work,it takes a short time on measurement,and get the humidity value. |
Low gas consume | It just consume 2L(101.2kPa)in a test. |
Self-locking joint | The self-locking joint is imported from Germany, safe, reliable, leak-proof. |
Data memory | High-capacity design, save up to 200set test data. |
Legible display | Dew point, Micro moisture (ppm), ambient temperature, ambient humidity, time, date, battery, etc, can be read from the LCD. |
RS232 port | Can be connected with serial printer, carry on data printing. |
Accurate measurement | Increases the temperature compensation function to ensure the accuracy of measurement results under various temperature conditions. |
Open calibration | This unit comes with a calibration function that allows you to calibrate the data without connecting to a computer. |

Specification
Dew point | Ranges | -80℃~+ 20℃ |
Accuracy | ±1℃(-60℃~+ 20℃)or ±2℃(-80℃~-60℃) | |
Response time | 63% takes 5s, 90% takes 45s / 63% takes 10s, 90% takes 240s | |
Ambient temperature | -40℃~+80℃ | |
ambient humidity | 0~100% RH | |
LCD display | 4.3 inch touch screen | |
Power | AC 220V | |
Built-in rechargeable battery | ||
Battery | Charge 20 hours, operating 10 hours | |
Operation
1. Connect To SF6 Electrical Equipment
Connect the screw thread port to the switch joint, screw up it, then close the needle valve on the other head of the tube.
Connect the quick coupling of the test tube to the inlet of the meter.
Connect the vent tube to the outlet.
At last, screw up the switch joint to the SF6 electrical equipment.
2. Initialization
Power on the meter, it will take 5 seconds to initialize.
3. Check The Battery
The meter takes precedence for use alternating current.
when use DC power, view the battery on top right corner. when the battery indicates the electricity less than 20%, please recharge the equipment and then begin to use.
4. Start
Open all needle valves of stream tube, use flow valve adjust flow to about 0.5L/M, then begin to measure the dew point of SF6.
It takes 5-10 minutes for the first measurement, followed test will only need take 3-5 minutes for each device.
5. Save Data
After test,save the data and print it.
6. Test Other Equipment
When complete one set of equipment, close the needle valve of the stream tube and turn off flow valve. Take the adapter off from SF6 electrical equipment. If any equipment needs to be tested repeat steps above.
7. Test Complete
After all tests, Please turn off the equipment.



Our organization successfully attained IS9001 Certification and European CE Certification of Multi-Functional Switchgear Sf6 Gas Analyser/Moisture Analyser/Dew Point Tester/Purity Tester. Our company strives to create a good atmosphere for employees to learn all the time and everything. Our company has established a good and stable partnership with many well-known brand companies abroad.
Hot Tags: HZSF-702 SF6 Gas Dew Point Moisture Meter, China, suppliers, manufacturers, price, for sale, sf6 gas moisture content measurement, sf6 dew point tester, sf6 gas dew point meter, SF6 Gas Dew Point Test Equipment, HZSF-702 dew point test of sf6 gas, Handheld SF6 Dew Point Analyzer, chilled mirror dew point meter, Chilled Mirror Dew Point Meter Instrument, clamp on ground earth resistance tester meter, Circuit Breaker Analyser, current transformer test machine, 200kv 5ma dc hipot tester, AC Withstand Voltage Test Platform, Automatic Transformer Test System
[[ProKeywords]]SPEC DATA
Send Inquiry
