
Lab Petroleum Equipment Edxrf Sulfur-in-Oil Test X-ray Fluorescence Total Sulfur Content Analyzer ASTM D4294
Product Introduction
We attach great importance to the market dynamics, our partial discharge test system, transformer turns ratio test set, load loss test of transformer are the current peer products of high quality products and the most competitive products. Our advantages lie in that we continuously provide new items with excellent quality and reasonable price. It is our ultimate target to help our customers to create best profit and business opportunity. Our company has always insisted on 'all with performance speak'. The spirit of continuous challenge to their innovation ability, good service in good faith, and strive to make their own contribution. To survive with quality is our slogan but also our action, customer demand is our pursuit, which has been the direction of our enterprise.
HZYN-1301 Kinematic Viscosity Bath ASTM D445 Oil Kinematic Viscometer
Outline
This Kinematic Viscometer is designed and manufactured specially according to the national standard "GB265 – 88 Determination of kinematic viscosity of petroleum products" . It's suitable to determine kinematic viscosity of liquid petroleum products. This apparatus has the function of timing of the trial sample movement and can calculate the final result of kinematic viscosity. This method is suitable to determine kinematic viscosity of liquid petroleum products ( It refers to Newtonian liquids ), and its unit is m2/s. Generally in actual utilization, the unit is mm2/s. The dynamic viscosity is equal with the result which use kinematic viscosity to multiply the density of the liquid. By this method, it can determine the time that the liquid with the certain volume flows past the calibrated glass capillary viscometer under the gravity in the certain stable temperature and the value that the constant value of capillary in the viscometer multiplies the flowing time, that is , the determined kinematic viscosity of liquid at the temperature. At the temperature, the value that kinematic viscosity multiplies the density of the liquid in the same temperature is the dynamic viscosity at the temperature.

Tech Data
Liquid bath holes | 4 |
Range to control the temperature | Indoor temperature-120℃ |
Precision to control the temperature | Room temperature -120℃≤±0.1℃ |
Room temperature | -40℃≤±0.2℃ |
Input power source | AC220V±10V, 50HZ |
Heating power | 1000W |
Test times | From 1 to 6 times, can adjust. |





Attentions
(1). When there is no water inside the aquarium, it prohibits power on.
(2). In the liquid of the bathtub, there can't be impurities and floating materials in order to avoid to block the test holes. For the new bath liquid , it often appears bubbles when heating, which will affect the test, especially when it appears bubbles in the test holes, it will have the most serious affect. Please loose the capillary to check if there is bubble in the test holes. If it appears, please use the hose to blow in order to get rid of the bubbles or use the clean the toothbrush to wash off the bubbles.
(3). Before we use the apparatus, we must ensure the reliable earthing.
(4). When we re-start the apparatus, the interval of use need to be above 15 minutes. And the apparatus is started in the cold bath state, and it needs to be used after 45 minutes.
(5). When we rectify the temperature with the full-immersion thermometer, the effective scale of the thermometer can't be exposed to the liquid level of the constant temperature bath.
(6). Prohibit to store or use the apparatus in the wet environment with the corrosive gas.
(7). When we clip the capillary, please note the height of upper opening and avoid to enter water in test tube.
(8). After use for a period or when we find the oil level measurement is insensitive, we should clean the test holes in the test clip in time.
(9). During using the apparatus, if appears fault, you should invite the professionals to repair and contact with us in time. If it's quality problem, we can offer the gratuitous warranty within one year.
(10). For the power source, you must keep the good earthing.



Our company's purpose is to market-oriented, according to customer demand development, production of high-quality Lab Petroleum Equipment Edxrf Sulfur-in-Oil Test X-ray Fluorescence Total Sulfur Content Analyzer ASTM D4294. We have established long-term product supply and demand and quality information feedback relationships with many companies. If you have any requests, pls email Us with your detailed demands, we will give you the most wholesale Competitive Price with the Super Quality and the Unbeatable First-class Service!
Hot Tags: HZYN-1301 ASTM D445 Automatic Oil Kinematic Viscometer, China, suppliers, manufacturers, price, for sale, kinematic viscosimeter, kinematic viscometer for petroleum products, automatic portable kinematic viscometer, Kinematic Viscometer Bath, kinematic viscometer with digital bath, ISO3104 Crude Oil Kinematic Viscometer, hzyn-1301, kinetic viscosity meter, kinematic viscosity test of bitumen, Insulation Oil Kinematic Viscometer, kinematicviscometer, engine oil viscosity tester, viscosity measurement device, ASTM D 445 Viscosity Test Device, SF6 Gas Purity Tester, ac test transformer 50kv, oil color tester, interfacial tension test for transformer oil, oil trace moisture tester, capacitance and dissipation factor tester
[[ProKeywords]]SPEC DATA
Send Inquiry
