HZ-ATU601 Digital Portable Ultrasonic Flaw Inspection Detector
Huazheng Electric Manufacturing (Baoding) Co., Ltd. is one of the leading manufacturers and suppliers of hz-atu601 digital portable ultrasonic flaw inspection detector in China. Please feel free to buy high quality equipment for sale here from our factory. Good service and reasonable price are available.
Preface
Thank you very much for using our Digital Ultrasonic Flaw Detector. The instrument adopts state-of-the-art integrated circuit technology and a new TFT color display, each of which meets or exceeds internationally accepted performance targets. The instrument is programmed with a user-oriented interface that is straight-forward and intuitive to use. In order to correctly operate the ultrasonic flaw detector, please read this operating manual and other supplied information carefully before initial use.
It has two models – high version and low version – that correspond to low and high configurations. Users can refer to the operating manual according to their specific model.
Prior to first-use, please check carefully whether the instruments and accessories are consistent with the packing list – if not, please contact us. Please also carefully read the operating manual to ensure that you understand the rights and services you may be entitled to.
Attention
The instrument should only be used in industry, and not in medical testing.
In order to ensure safe operation of the instrument, the operator should have comprehensive knowledge of non-destructive testing.
The detector must only be used in appropriate environments – especially, the detector cannot be used in environments with a strong magnetic field or strong corrosion.
To avoid unnecessary loss and to ensure user safety, please operate the detector according to the manual.
Please contact dealers when the detector exhibits a fault – please refrain from self-disassembly or reparation.
Specifications
Low version High version
Testing
range 0～9999mm 0～25000 mm
Velocity 1000～9999 m/s 200～20000 m/s
Channel
Storage 10 100
Waveform
Storage 100 1000
Record
Storage 5min×10 5min×20
Gain 0 dB～110 dB
Display
Delay -15 µs～+3400 µs
Probe Delay 0 µs～1000 µs
Frequency 0.2～15MHz 0.2～20MHz
Noise Level ≤10％
Probe
Damping 50 Ω, 75 Ω , 150 Ω , 500 Ω
Probe repeating
Frequency
Automatic low, automatic medium, automatic high, 5～1000 Hz
Sensitivity ＞62 dB(depth: 200 mm, flat-bottom hole Ф2)
Resolution ＞40 dB
Linearity
Reject 0～80%(digital reject)
Vertical Linearity
Error
≤3%
Horizontal Linearity
Error
≤0.1%
Dynamic
Range ≥32 dB
Pulse
Energy Fixed Multi-grades adjustable( 100V, 250V,
350V, 450V)
Pulse Width 50～1000 ns Auto match (50～1000 ns); sharp pulse
Ram 1GB
Hot Tags: hz-atu601 digital portable ultrasonic flaw inspection detector, China, suppliers, manufacturers, price, for sale, sf6 gas filling machine, multimeter calibrator, ttr calibration verification box, 20kw ac load bank, earth loop impedance tester, process calibrator
Send Inquiry
