HZSG2624 Lithium-Battery Handheld Spectrometer

All-Scenario Element Analysis Expert Of Lithium Battery Industry

Handheld ternary lithium-battery spectrum analyzer is able to detect Ni, Co, Mn and other elements and their contents, thus quickly distinguishing material types (e.g. 622, 532 and 111 type lithium batteries), such as positive and negative electrodes, lithium batteries, lead-acid batteries, lithium iron phosphate power batteries, high-rate power batteries, ternary power batteries, soft-pack cells, 18650 lithium cells, polymer power cells, aluminum-shell cells, flat plate cells, high-quality cells dismantled from machines, battery packs of electric vehicles, etc. Handheld ternary lithium-battery spectrum analyzer is applicable to detection ofNi, Co, Mn and other elements and their contents, in order to facilitate material separation (e.g. 622, 532 and 111 type lithium batteries).

In the exploration of metals in batteries, the portable XRF analyzer, compared with conventional XRF equipment in laboratories, can not only provide reliable data faster for exploration personnel to make correct decisions, but also can screen samples in order to provide more suitable samples for laboratory analysis, thereby helping to reduce exploration costs and improve the return on investment. The portable XRF analyzer can be used for sample screening in order to select appropriate samples for analysis. Such preparation of samples enables the portable XRF analyzer to get high-quality quantitative data close to laboratory analysis results.

Application Advantages In Lithium Battery

Industry

1. Mining

Quick detection of elements in beneficiation, grinding, smelting and refining.

2. Positive electrode material

Quality control of Ni, Co and Mn in precursor slurry.

3. Testing of production equipment and tools

Verification of metals and alloys, analysis of coating thickness of equipment and detection of trace elements (e.g. Cu and Zn) during the manufacturing and delivery of production equipment to avoid safety hazards of metal contamination of positive electrodes, diaphragm and negative electrodes due to residual elements in production equipment; maintenance of production equipment and tools.

4. Lithium battery manufacturer

Analysis and detection of electrode materials and contact samples in workshops, and measurement of materials, tools and spare parts in workshops, in order to avoid any abnormalities and strictly meet the requirements for Fe/Cr/Ni/Cu/Zn/Co/Ag in raw materials.

5. Recycling of used batteries

Detection of Ni, Co, Mn and other elements in positive electrodes and powder; detection of the Cu content in copper foils of negative electrodes of used batteries; detection of components in metal shells and powder of batteries; and on-site detection and quick classification of a large number of used batteries. The model and components of used batteries can be identified in a few seconds, to provide necessary information for quick and reliable judgments of buyers and sellers in transactions.

Technical Specification Of HZSG2624 Spectrometer

Super fast and precise material classification

Environmental requirements	Temperature: -20 °C to 50°C; relative humidity: 10% to 90% ,( without condensation). The work site should be far away from intense magnetic fields, strong vibration sources or high-frequency equipment.
Functional advantage	Waterproof, dustproof, anti-puncture, anti-falling; good balance for standing on the workbench without any additional support; one-key design, free of fatigue after long-time operation.
Excitation source	High-power micro straight electronic X-ray tube, with an excitation voltage of 35kV; no high-voltage cable or RF noise; better X-ray shielding and heat dissipation. Fixed voltage 35kV, current 100uA (Moxtek), Ag target in standard configuration; W and Rh targets can be customized.
Technology	Technology, with higher X-ray count rate; application of conductive silver coating on the inner shell and electronic shielding fabric on the circuit board, to prevent electromagnetic interference to the stable element resolution design.
Detector	Si-pin detector for simultaneously recording of analytical data and spectrograms; Moxtek Si-PIN detector (6mm2 energy resolution 170eV FWHM).
Test elements	Alloy mode: for conventional elements (Co, Ni, Mn and Cu) of lithium batteries; ore mode (Co, Ni, Mn, Cu, LE and other elements).
Operation method	Non-standard sample test method, for database correction of the lithium battery recycling industry;
Test method	Touch or trigger control of testing. It is not necessary to press and hold the trigger for a long time in the test process. Or, press and hold the trigger to test samples as requested by customers.
Security	Trigger lock. The locking time can be set. Once this mode is enabled, both touch and trigger functions are not available.
Battery	Original 7.2V large-capacity rechargeable lithium batteries. It is not necessary to remove the batteries to check its power. Standard configuration: 2 lithium batteries;
Data display	Elements can be displayed or adjusted according to the test requirements;
Data storage	32GB embedded memory, standard 32G MicroSD card, suitable for storage of 150,000 sets of data and X-Ray spectrums as well as expansion;
Data export	Direct export by the storage device SD card or USB flash disk; export by PC software;
Data format	PDF or Excel format, including element contents, spectrums and images; multiple optional templates;