+86-312-6775656

HZ-4000C Portable Underground Electrical Cable Wire Pipeline Locator

May 09, 2022

HZ-4000C pipeline locator is especially suitable for fast and accurate positioning of cable-to-ground insulation faults, (live) path finding, and depth positioning.

The pipeline instrument is designed based on the electromagnetic induction method and the application of the communication principle. In the use, it includes more humanized design. The large-screen LCD displays the signal strength, and the bar, arrows and voice prompts make it easy for the operator to judge the underground position of the cable and the fault point. One person can do it all.

The line meter can be used to find the path of the cable (live or not), and it can also be used to find the fault of the direct buried cable. It can complete tasks that could only be accomplished by a few sets of instruments in the past.

The pipeline instrument has changed the traditional concept of cable fault location. It does not need high-voltage test equipment, AC power supply, and waveform analysis. The wiring is simple and clear, and you can learn how to use it. In the past, when we searched for the cable path, we had to test the power outage of the cable, and some running cables could not be powered off, so the HZ-4000C pipeline locator can easily solve the problem of finding the path of the live cable. The line meter can also directly find the path of the 50Hz live cable.

HZ-4000C  pipe locator

Instrument features:

Full digital locator, clear display and reliable positioning

Portable and lightweight, easy to use, quick to find

Built-in rechargeable battery, no need for mains power during testing

With cable buried depth display, current display

Large LCD graphic display, no need for headphones during testing

Built-in ohmmeter to measure cable loop resistance

With two functions of cable location and fault finding

Insulation faults to ground up to 2MΩ can be found

With backlight function to adapt to night operation


1. Receiver

Operating Frequency: LF (815Hz), IF (8kHz), HF (33 kHz), RF (83 kHz), 50Hz

Antenna Modes: Valley Method (Zero Mode), Crest Method (Peak Mode) and Step Voltage Method (A-Frame)

Sound Indication: FM tones that vary with signal strength

Current indication: Display the effective current value of the cable under test (unit: mA)

Working temperature: -10℃+55℃

Battery type: 6 AA alkaline batteries

Battery indicator: graphic display

Battery life: continuous work > 8 hours: intermittent work > 16 hours

Size: 70×20×11cm

Weight: 3kg (with battery)

Signal strength representation: ladder diagram, digital range 0-999

Gain control: manual adjustment, dynamic range is 100dB

Detection depth: the maximum detection depth is not less than 5 meters

Maximum detection distance: up to 15km with a well-insulated cable in the direct connection method

Depth measurement: Press the depth key to display three digits, the maximum depth can be up to 10 meters

Accuracy*: Low Frequency: ±(1-5)%≤2.5m RF: ±(5-12)%≤2.5m

*Depending on site conditions, shape of non-concentric lines, number of adjacent lines and return current of soil

2. Transmitter

Operating Frequency: LF (815Hz), IF (8kHz), HF (33 kHz), RF (83 kHz)

Working mode: direct connection method, coupling method (caliper method), induction method

Matching load: 5 ohms - 3000 ohms

Impedance display: five digits

Overheating and overcurrent: automatic protection

Power output: low, mid, high

Battery type: rechargeable battery

Battery life: 4 hours to 8 hours of continuous work depending on the frequency of use, output power

Intermittent work 6 hours to 10 hours depends on the frequency of use, output power

Working temperature: -10℃+55℃

Size: 16×16×39cm

Weight: 4kg (including battery)


Send Inquiry