The inspection cycle for high-voltage insulated gloves and insulated shoes is 6 months, and the inspection cycle for electroscopes is 1 year.
High-voltage insulating gloves
High-voltage insulating gloves are electrical security products that protect the opponent or the human body. They are made of rubber, latex, plastic and other materials. They have the functions of electricity, water, acid and alkali, chemical and oil proof. Suitable for electric power industry, automobile and machinery maintenance, chemical industry, precision installation. Each material has different characteristics and has a special purpose according to the type of chemicals that come into contact with the glove.
principle
High-voltage insulated gloves for live working are an important part of the insulation protection of personal protective equipment. With the development of the power industry and the promotion of live working technology, more stringent requirements have been put forward for the safety of the use of high-voltage insulated gloves for live working.
Precautions for use
(1) After the user purchases the gloves, if they are found to have been exposed to rain, dampness, mildew, or other abnormal changes during transportation and storage, they should go to a legal testing agency to conduct an electrical performance review test.
(2) An inflation test must be carried out before use. If any damage is found, it cannot be used.
(3) When working, the sleeves of the clothes should be put into the mouth of the cylinder to prevent accidents.
(4) After use, the internal and external dirt should be scrubbed. After it is dry, sprinkle with talcum powder and place it flat to prevent damage from pressure, and do not place it on the ground.
(5) It should be stored in a warehouse with a dry and ventilated room temperature of -15°C to +30°C and a relative humidity of 50% to 80%, away from heat sources, and more than 20 cm away from the ground and walls. Avoid the influence of corrosive substances such as acid, alkali, oil, etc., do not place it in the open air, avoid direct sunlight, and do not put it on the ground.
(6) A preventive test must be carried out after 6 months of use.
Insulated shoes
Insulating shoes is a kind of safety shoes made with insulating materials. The scope of application of electrically insulating shoes is clearly stated in the new standard: electrically insulating leather shoes and cloth-covered electrically insulating shoes with a test voltage of 15KV or less are used in the working environment of power frequency (50-60F) below 1000V, and the test voltage is above 15KV. The electrical insulating rubber shoes of the city are suitable for working environment with power frequency above 1000V.
Adhere to the prevention test in the use of electrically insulating shoes
The new standard GB12011-2000 for electrically insulating shoes has made specific provisions in terms of production, packaging, transportation, storage and use. It not only restricts manufacturers from continuously improving quality, but also puts forward new requirements for product users: during use, sharp objects should be avoided to stab the sole of the shoe, and the shoe upper should be kept dry during use to avoid high temperature and corrosive substances. In particular, the labor safety supervision department should conduct handover tests on the purchase of new insulated shoes. A preventive test should be done after the product has been worn for 6 months. If the product is not qualified due to piercing with a sharp object, it should not be used as an insulating shoe.
Choice of insulating shoes
Insulated leather shoes of 6KV under normal voltage can have a protective effect. If high-voltage operation should be based on environmental requirements, the corresponding insulating boots should be selected, generally made of natural rubber, 12KV insulated boots, 25KV insulated high boots, 40KV and so on. In addition, it should be reminded that in addition to insulating shoes and boots, corresponding protective products such as insulating gloves and insulating clothing should be selected according to the needs when working in a high-voltage environment to avoid accidents.
Electroscope
The electroscope is an auxiliary safety device commonly used by electricians. It is used to check whether the conductors below 500V or the shells of various electrical equipment are live. An ordinary low-voltage electroscope can be carried with you, as long as you master the principle of the electroscope, combine the familiar electrician principle, and use many skills flexibly.
use
The electroscope is mainly used to test high-voltage electrical equipment with a voltage above 250V to the ground. At present, three types of light-emitting type, sound and light type, and windmill type are widely used. They are generally composed of three parts: detection part (indicator part or windmill), insulation part, and handshake part. The insulating part refers to the part from the metal connecting screw at the lower part of the indicator to the stop of the cover guard ring, and the handshake part refers to the part below the cover guard ring. Among them, the length of the insulating part and the handshake part are different depending on the voltage level.
