HZHG-100KV-1.5 100kV AC DC Voltage Divider
Huazheng Electric Manufacturing (Baoding) Co., Ltd. is one of the leading manufacturers and suppliers of hzhg-100kv-1.5 100kv ac dc voltage divider in China. Please feel free to buy high quality equipment for sale here from our factory. Good service and reasonable price are available.
Huazheng HZHG-100KV-1.5 Voltage Divider
Technical Specifications
| Category | Parameter | Specification |
|---|---|---|
| High-Voltage Probe | Rated Voltage | AC 100 kV / DC 100 kV |
| Insulation Medium | Dry dielectric material | |
| Capacitance | 100 pF | |
| Resistance | 800 MΩ | |
| Withstand Voltage | 1.1 x rated voltage, 1 minute | |
| Kilovoltmeter Parameters | Voltage Input | 0 – 200.00 V |
| Voltage Display | 0 – 1000 kV | |
| DC Accuracy | ±1.0% ± 100 digits | |
| AC Accuracy (True RMS) | ±1.5% ± 200 digits | |
| Frequency Response | 45 – 65 Hz | |
| Division Ratio | 1:1 to 1:9999 |
Structural Layout Description
① High voltage input: The top of the voltage equalizing cap (M8 ) is the high voltage connection terminal to be measured.
② High-voltage cylinder: built-in voltage-dividing resistor and capacitor.
③Output: The sampling signal output terminal of the voltage divider is connected to the input terminal of the meter panel.
④Grounding: connected to the earth grid.
⑤Display area: Automatic identification of AC and DC. When the input is AC, it is displayed as AC; when the input is DC, this value is displayed as DC. When used with a voltage divider, it is necessary to set a suitable voltage divider ratio (set at the factory).
⑥Sampling signal input: sampling voltage input connection port.
⑦Charging port: charging terminal (connect to mains 90-220V).
⑧Power switch: main power switch.
Preparation before the test
The AC and DC voltage dividers are placed in a certain space, and the surrounding space is kept at least twice the height of the voltage divider.
Ground connection: The grounding poles at the bottom of the voltage divider and on the kilovolt meter panel should be reliably grounded. It is prohibited to use the voltage divider before grounding.
Signal connection: The coaxial cable provided to the user is a sampling signal connection cable dedicated to the kilovoltmeter. Use this cable to connect the signal output port at the bottom of the voltage divider to the signal input port on the kilovoltmeter panel.
Note: The signal connection cable is for single-use only and cannot be connected with other coaxial cables or any connecting wires!
High voltage connection: Use a high voltage lead to connect the high voltage measured end to the M8 screw of the voltage equalizing cap at the top of the voltage divider.
Hot Tags: hzhg-100kv-1.5 100kv ac dc voltage divider, China, suppliers, manufacturers, price, for sale, insulated rescue hook, acdc kilovoltmeters, Contact Voltage Regulator, voltage divider 50kv 100kv 150kv 300kv, High Voltage Test Set, hi pot tester ac dc
Send Inquiry
