HZAQ-YGA Remote Control Electric Insulation Rod Test Stand

HZAQ-YGA Remote Control Electric Insulation Rod Test Stand

I. Product description

This test device is used for the overall power frequency withstand voltage test of insulating rods, electroscopes and other insulating tools and instruments of 1000kV and below. The insulating rod pressure-resistant support adopts an insulating gantry structure, and a hoisting trolley is installed in the middle of the gantry, and the insulating rod can be hoisted for the withstand voltage test.

II. Features

● The effective height of the gantry is 5-10 meters, and the whole insulating rod can be tested.

● The gantry is supported by 2 groups of 4 pillar insulators, and the side is connected by steel plate fittings to form a whole.

● There are insulating rails in the middle of the pillar insulators on both sides, on which the lifting trolley can slide.

● The top has a pressure equalizing cover to reduce partial discharge.

● The hoisting trolley is equipped with a battery pack, and the wire sling is not connected to the lower part, and is operated by remote control to ensure good insulation of high voltage.

● There are 12 stations on the hoisting trolley, 12 insulating rods can be suspended at a time, each station can measure the high-voltage leakage current, and the test data can be transmitted to the test bench through infrared communication, and the test bench can display the leakage of 12 channels in real time. current and battery level.

● The lifting trolley is moved to the lower side, and the equipment can be charged automatically.

● The lower part of the insulating rod adopts a special stainless steel test clip, which is connected to the ground.

III. Technical parameter

Rated voltage: 500-1200kV

Number of stations: 12

Leakage current range: 200mA

Leakage current measurement accuracy: 1%

Effective height: 5-10 meters

Hot Tags: hzaq-yga remote control electric insulation rod test stand, China, suppliers, manufacturers, price, for sale